Radioberry juice
About the Radioberry juice PCB
Radioberry juice is an open source PCB design by OE9SAU, published on GitHub. It is a 2-layer board measuring 65 × 56 mm, with 87 components from 46 distinct parts.
Other key parts include the LD1117S33TR, FT2232HL and 93LC56B. By type, the board carries 37 capacitors, 22 resistors, 10 connectors, 5 diodes, 4 ICs and 4 inductors.
It belongs with the rf & radio designs in this gallery.
From the project
SDR TRX from Radioberry
RadioBerry V2.0 - Ham radio cape for Raspberry PI ==============================================
- Building a HAM Radio - Learning (from noob to guru)
WIKI FOR MORE DETAILS: https://github.com/pa3gsb/Radioberry-2.x/wiki
- Raspberry PI - Radio extension board (cape) - using AD9866 (12 bit) for RX and TX modes.
Main components on the Radioberry juice
Radioberry juice bill of materials (BOM)
87 components, 46 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LD1117S33TR | V-REG_SOT223 | U2, U5 |
| 1 | FT2232HL | LQFP-64_10x10mm_Pitch0.5mm | U3 |
| 1 | 93LC56B | SOT-23-6_Handsoldering | U4 |
| 1 | DMP3099L | SOT23_3 | Q1 |
| 1 | 12MHz | ABM712000MHZD2YT | Y1 |
| 1 | PS | PWRBARREL2 | CN1 |
| 1 | OPEN | JUMPER | J1 |
| 1 | TYPE-C-31-M-12 | TYPE-C-31-M-12 | J2 |
| 2 | JNO | SMD-0603 | J3, J4 |
| 1 | 2x20 | PINHEAD_2X20_BSILK | J5 |
| 1 | MH1 | m3 | J6 |
| 1 | MH2 | m3 | J7 |
| 1 | MH3 | m3 | J8 |
| 1 | MH4 | m3 | J9 |
| 1 | IO10 | 5x2 | DB1 |
| 1 | 3A@20V | FUSE | F1 |
| 1 | LMZ22005TZ_NOPB | NOPB | VR1 |
| 1 | SMBJ18CA | smbj18ca | D1 |
| 2 | LED | LEDn | D2, D5 |
| 2 | PGB1010603 | SMD-0603 | D3, D4 |
Show 26 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 600R | SMD-0603 | FB1, FB2, FB3, FB4 |
| 3 | 10uF | C_0805_HandSoldering | C1, C3, C35 |
| 3 | 100nF | C_0805_HandSoldering | C2, C7, C37 |
| 2 | 100uF | C_0805_HandSoldering | C4, C36 |
| 1 | 0.47uF | C_0805_HandSoldering | C5 |
| 1 | 47uF | CP_Tantalum_Case-V_EIA-7343-20_Hand | C6 |
| 7 | 4.7uF | C_0805_HandSoldering | C8, C11, C15, C27, C29, C31, C33 |
| 12 | 100nF | C_0603_HandSoldering | C9, C12, C16, C17, C20, C23, C24, C25 +4 |
| 1 | 3.3uF | C_0805_HandSoldering | C10 |
| 2 | 1nF | C_0603_HandSoldering | C13, C22 |
| 3 | 10nF | C_0603_HandSoldering | C14, C21, C26 |
| 2 | 18pF | C_0603_HandSoldering | C18, C19 |
| 1 | 620 | R_0603_HandSoldering | R1 |
| 1 | 1.5K | R_0603_HandSoldering | R2 |
| 2 | 1K | R_0603_HandSoldering | R3, R20 |
| 2 | 5.1K | R_0603_HandSoldering | R4, R5 |
| 2 | 10 | R_0603_HandSoldering | R6, R7 |
| 1 | 12K 1% | R_0603_HandSoldering | R8 |
| 1 | 27 | R_0603_HandSoldering | R9 |
| 4 | 10K | R_0603_HandSoldering | R10, R12, R13, R14 |
| 1 | 1M | R_0603_HandSoldering | R11 |
| 1 | 2.2K | R_0603_HandSoldering | R15 |
| 1 | 4K7 | R_0603_HandSoldering | R16 |
| 3 | 4.7K | R_0603_HandSoldering | R17, R18, R19 |
| 1 | 3.3K | R_0603_HandSoldering | R21 |
| 1 | 47 | R_0603_HandSoldering | R22 |
Radioberry juice design files
The KiCad project lives in the OE9SAU/SAUBerry9 repository on GitHub; these links point at the commit this page was built from.
Radioberry juice: common questions
How big is the Radioberry juice PCB?
The Radioberry juice measures 65 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Radioberry juice?
87 components, from 46 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Radioberry juice design files?
From the OE9SAU/SAUBerry9 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Radioberry juice design in my own project?
The repository has no license, so all rights stay with OE9SAU. Use it as a reference, and ask the author before reusing the design.
More boards in SAUBerry9
FPGARadioberry
65 × 56 mm143 parts4LNo license4
Vswr extension bridge route
83.7 × 37 mm50 parts2LNo license4
Vswr extension bridge
84 × 37 mm49 parts2LNo license4
Vswr
37 × 74 mm34 parts2LNo license4
SAUBerry front v1.1
311.2 × 129.3 mm29 parts2LNo license4
AVR/ArduinoFilter shield
101.6 × 53.4 mm27 parts2LNo license4
Pwr latcher
50 × 25.4 mm20 parts2LNo license4
Pa driver
54.6 × 34.3 mm10 parts2LNo license4
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372