HardLabs

Slider

ohmtech-rdi·eurorack-blocks·blocks/slider/slider.kicad_pcb

Slider PCB layout, top view — open source board by ohmtech-rdi
Simulate this board

About the Slider PCB

Slider is an open source PCB design by ohmtech-rdi, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 17 × 35.5 mm, with 7 components from 5 distinct parts.

Other key parts include the PTL. By type, the board carries 4 connectors, 1 IC, 1 capacitor and 1 resistor.

It belongs with the audio designs in this gallery.

From the project

Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

This block is a simple potentiometer and LED in a slider form factor.

It is adapted from the Mutable Instuments Stages schematics.

Pin headers don't come with just one position. Instead of that, the BOM has 2-position pin male headers that need to be broke into 2 pieces.

This block provides a silder potentiometer with a red LED.

This modules needs to be connected to the 3V3A and GND lines from the power block.

Main components on the Slider

PTL

Slider bill of materials (BOM)

7 components, 5 distinct parts.

QtyPartRefs
1
PTL
U1
2
OUT
J1, J2
2
GND
J3, J4
1
100n
C1
1
15k
R1

Slider design files

The KiCad project lives in the ohmtech-rdi/eurorack-blocks repository on GitHub; these links point at the commit this page was built from.

Slider: common questions

How big is the Slider PCB?

The Slider measures 17 × 35.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Slider?

7 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Slider design files?

From the ohmtech-rdi/eurorack-blocks repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Slider design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which ohmtech-rdi chose for the repository.

More boards in eurorack-blocks

Similar boards