Unique-DAP

Oru-star·Unique-DAP·DAP'S PCB/DAP'S PCB.kicad_pcb

Unique-DAP PCB layout, top view — open source ESP32 board by Oru-star

About the Unique-DAP PCB

Unique-DAP is an open source ESP32 PCB design by Oru-star, published on GitHub. It is a 4-layer board measuring 50 × 70 mm, with 93 components from 35 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the ES9038Q2M, TPS61023DRLR, TPS63021DSJR, BQ25895RTW and TUSB320LAIRWBR. By type, the board carries 39 capacitors, 29 resistors, 7 ICs, 7 switches, 6 connectors and 4 inductors.

It belongs with the audio and displays & leds designs in this gallery.

From the project

Unique DAP is an ESP32-S3-based portable audio player built around a dedicated high-performance audio DAC and headphone amplifier. It uses a Sharp reflective memory display rather than a conventional backlit LCD, removable microSD storage, and two rotary encoders for navigation.

Unique DAP is an ESP32-S3-based portable audio player built around a dedicated high-performance audio DAC and headphone amplifier. It uses a Sharp reflective memory display rather than a conventional backlit LCD, removable microSD storage, and two rotary encoders for navigation. Charging is provided through a USB Type-C port.

- Controller: Espressif ESP32-S3 module - Audio: ESS ES9038Q2M DAC and MAX97220A headphone amplifier - Display: Sharp LS032B7DD02, 3.16-inch reflective memory LCD - Storage: Removable microSDXC card; 128 GB target capacity - Controls: Two rotary encoders and…

Main components on the Unique-DAP

Unique-DAP bill of materials (BOM)

93 components, 35 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ES9038Q2M
ESS Technology
IC1
1
TPS61023DRLR
Texas Instruments
U1
1
TPS63021DSJR
Texas Instruments
U2
1
BQ25895RTW
Texas Instruments
U3
1
TUSB320LAIRWBR
Texas Instruments
U4
1
MAX97220AETE+T
ADI(亚德诺)/MAXIM(美信)
U5
1
ESP32-S3-WROOM-1
Espressif
U6
1
40 MHz
Abracon
Y1
1
USB_C_Receptacle_USB2.0_16P
GCT
J1
1
Battery connector
Samtec
J2
1
Programming-header
Samtec
J3
1
SHARP_LS032B7DD02
Hirose
J4
1
AudioJack3
Same Sky / CUI Devices
J5
1
Micro_SD_Card
Hirose Electric
J6
5
SW_Push
Nidec Copal
SW1, SW2-BOOT1, SW4, SW5, SW6
2
RotaryEncoder_Switch
ALPS Alpine
SW2, SW3
1
FerriteBead
Murata
FB1
1
1uH
Würth Elektronik
L1
1
1.5uH
Coilcraft
L2
1
2.2uH
Murata
L3
Show 15 more
QtyPartRefs
8
10uF
Samsung (candidate)
C1, C8, C9, C10, C12, C13, C14, C30
10
100nF
Murata
C2, C16, C17, C18, C19, C20, C21, C23 +2
4
22uF
Yageo
C3, C4, C5, C6
9
1uF
TDK (direct substitute candidate)
C7, C24, C25, C26, C27, C29, C32, C34 +1
1
47nF
Murata
C11
6
4.7uF
Murata (candidate)
C15, C22, C36, C37, C38, C39
1
560pF
Murata
C33
1
100K
Yageo
R1
1
27.4k
Yageo
R2
1
200k
Yageo
R3
14
10K
R4, R5, R6, R7, R9, R10, R11, R15 +6
1
260ohm
Yageo (candidate)
R8
1
900K
Yageo (candidate)
R12
2
4.7k
Yageo
R13, R14
8
20k
TE Connectivity
R17, R20, R21, R22, R23, R24, R25, R26

Unique-DAP design files

The KiCad project lives in the Oru-star/Unique-DAP repository on GitHub; these links point at the commit this page was built from.

Unique-DAP: common questions

What microcontroller does the Unique-DAP use?

The Unique-DAP is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Unique-DAP PCB?

The Unique-DAP measures 50 × 70 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Unique-DAP?

93 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Unique-DAP design files?

From the Oru-star/Unique-DAP repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Unique-DAP design in my own project?

The repository has no license, so all rights stay with Oru-star. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Unique-DAP without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards