Watt the hack
pandaiscodingcpu·watt_the_hack
About the Watt the hack PCB
Watt the hack is an open source ESP32 PCB design by pandaiscodingcpu, published on GitHub. It is a board, with 20 components from 13 distinct parts.
Its main chip is the ESP32-C3-DevKitM-1, from the ESP32 family. Other key parts include the TSSP58038, TB6612FNG, NEO-6M-GPS, FT232RL and TP4056-42-ESOP8. By type, the board carries 11 ICs, 5 connectors, 2 modules, 1 battery holder and 1 microphone.
From the project
- bill of materials.xslx: includes the cost of the materials - linfollowerrobot.f3d: CAD model of the chasis - schematic,png: Wiring diagram of the circuit - Line Follower Hack Schematic: KiCAD schematic file - PCBIDEATION.PNG`: Png file of the PCB Design from fusion
Main components on the Watt the hack
Watt the hack bill of materials (BOM)
20 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TSSP58038 | Vishay_MINICAST-3Pin | U1, U4 |
| 1 | TB6612FNG | SSOP-24_5.3x8.2mm_P0.65mm | U2 |
| 1 | ESP32-C3-DevKitM-1 | ESP32-C3-DevKitM-1 | U3 |
| 1 | NEO-6M-GPS | ublox_NEO | U5 |
| 1 | FT232RL | SSOP-28_5.3x10.2mm_P0.65mm | U7 |
| 4 | TP4056-42-ESOP8 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U8, U11, U12, U13 |
| 1 | LM2596T-12 | TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_Vertical | U9 |
| 2 | Motor_DC | PinHeader_1x02_P2.54mm_Vertical | M1, M2 |
| 1 | OLED | PinHeader_1x04_P1.27mm_Horizontal | J1 |
| 1 | SOLAR PANEL | PinHeader_1x04_P2.54mm_Horizontal | J2 |
| 3 | SOLAR PANEL | PinHeader_1x02_P2.54mm_Vertical | J3, J4, J5 |
| 1 | Battery | PinHeader_1x02_P2.54mm_Horizontal | BT1 |
| 1 | T3902 | ST_QFN-2L_1.6x1.0mm | MK1 |
Watt the hack design files
The KiCad project lives in the pandaiscodingcpu/watt_the_hack repository on GitHub; these links point at the commit this page was built from.
Watt the hack: common questions
What microcontroller does the Watt the hack use?
The Watt the hack is built around the ESP32-C3-DevKitM-1, from the ESP32 family.
How many components are on the Watt the hack?
20 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Watt the hack design files?
From the pandaiscodingcpu/watt_the_hack repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Watt the hack design in my own project?
The repository has no license, so all rights stay with pandaiscodingcpu. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Watt the hack without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k