8 open source boards using the NEO-6M-GPS
Real designs built with the NEO-6M-GPS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
TS Tracker
tor1kk
48 × 50 mm69 parts4LGPL-3.03STM32
Stm32-lora gps tracker
usarrahim
79.8 × 65.9 mm42 parts2LMIT1RP2040/RP2350
On-Board-Computer
prasannan-robots
90.1 × 95.3 mm12 parts2LNo license0ESP32
Electabuzz Unplugged
MayankBagad
167.1 × 181.2 mm11 parts2LNo license0- schematic only · 20 partsESP32
Watt the hack
pandaiscodingcpu
20 partsNo license0 - schematic only · 18 parts
Enhanced edr
kartiknagare33
18 partsMIT0 - schematic only · 13 partsESP32
Unplugged DJS
Ashutosh2005Ashu
13 partsNo license0 - schematic only · 50 partsAVR/Arduino
Task2
Omkar1464
50 parts2LNo license0
The NEO-6M-GPS in open source designs
The gallery holds 8 open source boards using the NEO-6M-GPS from 8 GitHub repositories; a typical one measures about 84.9 × 80.6 mm and carries around 19 components.
80% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.
The most starred is TS Tracker by tor1kk.
Parts used alongside the NEO-6M-GPS
Microcontrollers on boards using the NEO-6M-GPS
What boards using the NEO-6M-GPS are built for
NEO-6M-GPS: common questions
Where can I find a NEO-6M-GPS reference design?
Each of the 8 boards on this page is a real design using the NEO-6M-GPS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the NEO-6M-GPS?
The TB6612FNG, DM-OLED096-636, ESP32-C3-DevKitM-1, ESP32-CAM and TP4056-42-ESOP8 appear in the most repositories here.
Which microcontrollers do boards using the NEO-6M-GPS use?
Most are built on ESP32 (3), STM32 (2), AVR/Arduino (1) and RP2040/RP2350 (1).
How big is a typical board using the NEO-6M-GPS?
The median is 84.9 × 80.6 mm, and 80% are two-layer designs.
What is the most popular open source board using the NEO-6M-GPS?
By GitHub stars, TS Tracker by tor1kk, with 3 stars.
Can I simulate one of these boards using the NEO-6M-GPS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.