Panel proto data slicer board

PantsForBirds·adsbee·kicad/prototyping/panel_proto_data_slicer_board/panel_proto_data_slicer_board.kicad_pcb

Panel proto data slicer board layout, top view — open source board by PantsForBirds

About the Panel proto data slicer board

Panel proto data slicer board is an open source PCB design by PantsForBirds, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 56 × 37.5 mm, with 13 components from 8 distinct parts.

Other key parts include the MCP6566. By type, the board carries 8 resistors, 4 capacitors and 1 IC.

It belongs with the rf & radio and dev boards & breakouts designs in this gallery.

From the project

Open Source Embedded ADS-B Receiver

ADSBee is a family of open-source, dual-band ADS-B receivers from Pants for Birds LLC. Every ADSBee decodes 1090 MHz Mode S / ADS-B and 978 MHz UAT transmissions onboard — no SDR dongle, FPGA, or host computer required — maintains an aircraft dictionary, and streams tracked aircraft over UART (and, on the 1090 family, WiFi / Ethernet) in a wide range of output protocols. This repository holds the firmware, hardware design files, datasheets, and host software for the whole family.

Panel proto data slicer board, from the project README — From the project README

Main components on the Panel proto data slicer board

Panel proto data slicer board bill of materials (BOM)

13 components, 8 distinct parts.

Qty	Part	Footprint	Refs
1	MCP6566	SOT-353_SC-70-5	U1
1	3pF	C_0603_1608Metric	C1
1	0.1uF	C_0603_1608Metric	C2
1	100pF	C_0603_1608Metric	C3
1	10nF	C_0603_1608Metric	C4
3	10k	R_0603_1608Metric	R1, R3, R4
2	1M	R_0603_1608Metric	R2, R5
3	1k	R_0603_1608Metric	R6, R7, R8

Panel proto data slicer board design files

The KiCad project lives in the PantsForBirds/adsbee repository on GitHub; these links point at the commit this page was built from.

Panel proto data slicer board: common questions

How big is the Panel proto data slicer board?

The Panel proto data slicer board measures 56 × 37.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Panel proto data slicer board?

13 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Panel proto data slicer board design files?

From the PantsForBirds/adsbee repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Panel proto data slicer board design in my own project?

Yes, under the terms of its GPL-3.0 license, which PantsForBirds chose for the repository.

More boards in adsbee

Similar boards