Seebum
peedrooh·seebum
About the Seebum PCB
Seebum is an open source ESP32 PCB design by peedrooh, published on GitHub. It is a 4-layer board measuring 65 × 56 mm, with 91 components from 48 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AMS1117-3.3, CH343P, TB6612FNG, MPU-6050 and 74LVC1G126. By type, the board carries 30 capacitors, 20 resistors, 13 connectors, 8 ICs, 7 jumpers and 6 diodes.
Main components on the Seebum
Seebum bill of materials (BOM)
91 components, 48 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U201 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U202 |
| 1 | CH343P | TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U204 |
| 2 | TB6612FNG | SSOP-24_5.3x8.2mm_P0.65mm | U301, U302 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U303 |
| 1 | 74LVC1G126 | SOT-23-5 | U304 |
| 1 | LMR14050 | Texas_R-PDSO-G8_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U401 |
| 1 | AO4407 | SO-8_5.3x6.2mm_P1.27mm | Q101 |
| 2 | C49581 Q_NPN_BCE | SOT-23 | Q201, Q202 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J101 |
| 1 | CONN_01X06_PIN Conn_01x06_Pin | PinHeader_2x03_P2.54mm_Vertical | J102 |
| 2 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J201, J202 |
| 2 | CONN_01X03_SOCKET Conn_01x03_Socket | JST_PH_B3B-PH-SM4-TB_1x03-1MP_P2.00mm_Vertical | J301, J306 |
| 2 | CONN_01X02_SOCKET Conn_01x02_Socket | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J302, J304 |
| 2 | CONN_01X06_SOCKET Conn_01x06_Socket | JST_PH_S6B-PH-SM4-TB_1x06-1MP_P2.00mm_Horizontal | J303, J305 |
| 1 | CONN_01X08_SOCKET Conn_01x08_Socket | JST_PH_B8B-PH-SM4-TB_1x08-1MP_P2.00mm_Vertical | J307 |
| 1 | CONN_01X04_SOCKET Conn_01x04_Socket | JST_PH_B4B-PH-SM4-TB_1x04-1MP_P2.00mm_Vertical | J308 |
| 1 | GPIO | PinSocket_2x20_P2.54mm_Vertical | J501 |
| 2 | SOLDERJUMPER_2_BRIDGED SolderJumper_2_Bridged | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP201, JP202 |
| 5 | SOLDERJUMPER_2_OPEN SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP203, JP204, JP205, JP206, JP301 |
Show 28 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SW_DPDT_X2 SW_DPDT_x2 | 5Amp_Switch | SW101 |
| 2 | SW_MEC_5E | SW_SPST_B3U-1000P | SW201, SW202 |
| 1 | C391863 RED | LED_0805_2012Metric | D201 |
| 2 | C2891704 D_Schottky | D_SOD-123 | D204, D205 |
| 1 | C205441 BLUE | LED_0805_2012Metric | D210 |
| 1 | C84260 GREEN | LED_0805_2012Metric | D211 |
| 1 | PDS760-13 | D_PowerDI-5 | D401 |
| 1 | 8U2 8u2 | L_10.4x10.4_H4.8 | L401 |
| 3 | 10UF 10uF | C_0805_2012Metric | C201, C204, C207 |
| 3 | C38141 0,1uF | C_0805_2012Metric | C202, C205, C206 |
| 2 | 1UF 1uF | C_0805_2012Metric | C213, C214 |
| 2 | 100NF 100nF | C_0805_2012Metric | C215, C312 |
| 8 | 0.1UF 0.1uF | C_0805_2012Metric | C301, C302, C304, C306, C307, C308, C310, C311 |
| 2 | 10UF 10uF | CP_EIA-3528-21_Kemet-B | C303, C305 |
| 1 | 2.2NF 2.2nF | C_0805_2012Metric | C309 |
| 1 | 22NF 22nF | C_0805_2012Metric | C402 |
| 2 | 0U1F 0u1F | C_0805_2012Metric | C403, C411 |
| 4 | 47UF 47uF | C_0805_2012Metric | C405, C406, C407, C408 |
| 2 | 2U2F 2u2F | C_1206_3216Metric | C409, C410 |
| 1 | 2k | R_0805_2012Metric | R101 |
| 5 | 4K7 4k7 | R_0805_2012Metric | R102, R103, R104, R105, R301 |
| 4 | 1K | R_0805_2012Metric | R201, R204, R205, R303 |
| 2 | 10K 10k | R_0805_2012Metric | R202, R203 |
| 4 | 5K1 5k1 | R_0805_2012Metric | R212, R213, R214, R215 |
| 1 | 330 | R_0805_2012Metric | R302 |
| 1 | 84K5 84k5 | C_0805_2012Metric | R401 |
| 1 | 100K 100k | R_0805_2012Metric | R402 |
| 1 | 17K8 17k8 | C_0805_2012Metric | R403 |
Seebum design files
The KiCad project lives in the peedrooh/seebum repository on GitHub; these links point at the commit this page was built from.
Seebum: common questions
What microcontroller does the Seebum use?
The Seebum is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Seebum PCB?
The Seebum measures 65 × 56 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Seebum?
91 components, from 48 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Seebum design files?
From the peedrooh/seebum repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Seebum design in my own project?
The repository has no license, so all rights stay with peedrooh. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Seebum without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k