14 open source boards using the 74LVC1G126

Real designs built with the 74LVC1G126, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

14 boardsClear filters|Most starred

How designs wire the 74LVC1G126

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the 74LVC1G126 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 10 of 12 designs, most often 100 nF (then 1 µF).
  • Pin 4 has a series resistor on 5 of 12 designs, most often 51 Ω (then 0 Ω).
Pin 1Connected to: Signal 67% · 3.3V 33%
  • Capacitor to GND on 33% · 100 nF (3), 1 µF (1)
Pin 2Connected to: A connector 50%, the microcontroller 33%
  • Series resistor on 33% · 10 kΩ (1), 27 Ω (1), 68 kΩ (1)
GNDpin 3Connected to: GND 100%
Pin 4Connected to: A connector 33%
  • Series resistor on 42% · 51 Ω (1), 0 Ω (1), 47 Ω (1)
VCCpin 5Connected to: 3.3V 100%
  • Decoupling capacitor on 83% · 100 nF (11), 1 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include My jetson nano baseboard by NVIDIA-AI-IOT, Z80ctrlng by jblang, RadioNoob by EIectron and Longboi by KungfuPancake.

The 74LVC1G126 in open source designs

The gallery holds 14 open source boards using the 74LVC1G126 from 12 GitHub repositories; a typical one measures about 81 × 62.5 mm and carries around 95 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is My jetson nano baseboard by NVIDIA-AI-IOT.

Parts used alongside the 74LVC1G126

Microcontrollers on boards using the 74LVC1G126

74LVC1G126: common questions

Where can I find a 74LVC1G126 reference design?

Each of the 14 boards on this page is a real design using the 74LVC1G126. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LVC1G126 VCC pin?

The VCC pin has a decoupling capacitor on 10 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 12 open source designs using the 74LVC1G126.

What resistor goes on the 74LVC1G126 pin 4?

Pin 4 has a series resistor on 5 of 12 designs, most often 51 Ω (then 0 Ω). Counted from the KiCad layouts of 12 open source designs using the 74LVC1G126.

Which microcontrollers do boards using the 74LVC1G126 use?

Most are built on ESP32 (4), RP2040/RP2350 (2), FPGA (1) and Microchip SAM (1).

How big is a typical board using the 74LVC1G126?

The median is 81 × 62.5 mm, and 50% are two-layer designs.

What is the most popular open source board using the 74LVC1G126?

By GitHub stars, My jetson nano baseboard by NVIDIA-AI-IOT, with 91 stars.

Can I simulate one of these boards using the 74LVC1G126 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part