14 open source boards using the ADUM3160

Real designs built with the ADUM3160, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

14 boardsClear filters|Most starred

How designs wire the ADUM3160

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the ADUM3160 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD2 pin has a decoupling capacitor on 10 of 12 designs, most often 100 nF (then 1 µF).
  • The VDD1 pin has a capacitor to GND on 9 of 13 designs, most often 1 µF (then 100 nF).
  • The VBUS2 pin has a decoupling capacitor on 9 of 12 designs, most often 100 nF (then 1 µF).
  • The UD- pin has a series resistor on 8 of 13 designs, most often 22 Ω (then 24 Ω).
VBUS1pin 1Connected to: A connector 38% · 5V 38%
  • Capacitor to GND on 38% · 100 nF (4), 1 µF (2), 4.7 µF (1)
GND1pin 2, 8Connected to: GND 68% · a signal 24%
VDD1pin 3Connected to: Signal 92%
  • Capacitor to GND on 69% · 1 µF (5), 100 nF (4), 10 pF (1)
PDENpin 4Connected to: Signal 92%
  • Capacitor to GND on 54% · 100 nF (4), 1 µF (4)
SPUpin 5Connected to: Signal 77%
  • Capacitor to GND on 54% · 1 µF (4), 100 nF (3), 10 pF (1)
UD-pin 6Connected to: Signal 92%
  • Series resistor on 62% · 22 Ω (3), 24 Ω (2), 33 Ω (1)
UD+pin 7Connected to: Signal 92%
  • Series resistor on 67% · 22 Ω (3), 24 Ω (2), 33 Ω (1)
GND2pin 9, 15Connected to: GND 83%
DD+pin 10Connected to: The microcontroller 33%
  • Series resistor on 67% · 22 Ω (3), 33 Ω (1), 20 Ω (1)
DD-pin 11Connected to: The microcontroller 33%
  • Series resistor on 58% · 22 Ω (3), 33 Ω (1), 20 Ω (1)
SPDpin 13Connected to: 3.3V 42% · a signal 42%
  • Capacitor to GND on 67% · 100 nF (6), 1 µF (4)
VDD2pin 14Connected to: 3.3V 50% · a signal 42%
  • Decoupling capacitor on 83% · 100 nF (9), 1 µF (5)
VBUS2pin 16Connected to: 3.3V 75% · a signal 17%
  • Decoupling capacitor on 75% · 100 nF (9), 1 µF (4)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Delta by Scottapotamas, OverCycler 3 board by gligli, FreeEEG32-alpha1.5 by neuroidss and Digi interface by canislupus11.

The ADUM3160 in open source designs

The gallery holds 14 open source boards using the ADUM3160 from 13 GitHub repositories; a typical one measures about 95 × 72.3 mm and carries around 111 components.

57% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.

The most starred is Delta by Scottapotamas.

Microcontrollers on boards using the ADUM3160

ADUM3160: common questions

Where can I find a ADUM3160 reference design?

Each of the 14 boards on this page is a real design using the ADUM3160. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ADUM3160 VDD2 pin?

The VDD2 pin has a decoupling capacitor on 10 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the ADUM3160.

How is the ADUM3160 VDD1 pin connected?

The VDD1 pin has a capacitor to GND on 9 of 13 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 13 open source designs using the ADUM3160.

What decoupling capacitors do designs use on the ADUM3160 VBUS2 pin?

The VBUS2 pin has a decoupling capacitor on 9 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the ADUM3160.

Which microcontrollers do boards using the ADUM3160 use?

Most are built on ESP32 (5), STM32 (4), RP2040/RP2350 (2) and AVR/Arduino (1).

How big is a typical board using the ADUM3160?

The median is 95 × 72.3 mm, and 57% are two-layer designs.

What is the most popular open source board using the ADUM3160?

By GitHub stars, Delta by Scottapotamas, with 53 stars.

Can I simulate one of these boards using the ADUM3160 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part