DSP-Regulator-RevC
Phil-CIA·Development-Station-Power-Supply·hardware/kicad/dsp-regulator-rev-c/DSP-Regulator-RevC.kicad_pcb
About the DSP-Regulator-RevC PCB
DSP-Regulator-RevC is an open source PCB design by Phil-CIA, published on GitHub. It is a 2-layer board measuring 100 × 125 mm, with 226 components from 62 distinct parts.
Other key parts include the LMV358IDR, LM2596S-ADJ, AW9523B, INA2180A2IDGKR and TLV1702AIDGKR. By type, the board carries 100 resistors, 53 capacitors, 20 diodes, 16 ICs, 12 transistors and 9 test points.
It belongs with the power & battery designs in this gallery.
From the project
3 channel bench supply with current and voltage plotting
Integrated hardware and firmware repository for the development-station bench supply, its control electronics, front-panel display path, and supporting boards.
This is the active working repo for the full bench-supply platform, not just a single firmware target. It currently includes:
- ESP32 control firmware - DSP regulator board design - DSP regulator HAT / measurement-control board design - original front-panel display board files - USB hub board files and next-iter reference cleanup - bring-up notes, pin maps, and display evaluation references
Main components on the DSP-Regulator-RevC
DSP-Regulator-RevC bill of materials (BOM)
226 components, 62 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LMV358IDR TLV9352 Texas Instruments | SOIC-8_W3.9mm | U1, U3 |
| 3 | LM2596S-ADJ | TO-263-5_TabPin3 | U2, U4, U8 |
| 1 | AW9523B | QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U5 |
| 2 | INA2180A2IDGKR | VSSOP-8_3x3mm_P0.65mm | U6, U12 |
| 2 | TLV1702AIDGKR | Texas_S-PDSO-G8_3x3mm_P0.65mm | U7, U13 |
| 4 | LM74502DDFR | TSOT-23-8 | U9, U14, U15, U16 |
| 2 | INA3221 | Texas_RGV0016A_VQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm | U10, U11 |
| 7 | IRLZ44NPBF PSMN5R2-60YL hongjiacheng | LFPAK56 | Q1, Q2, Q4, Q5, Q7, Q8, Q10 |
| 4 | BSS138 hongjiacheng | Q_SOT-23 | Q3, Q6, Q9, Q12 |
| 1 | PSMN5R2-60YL hongjiacheng | LFPAK56 | Q11 |
| 3 | 1935161 Phoenix Contact | Terminal_Block_D1.3mm_P5mm | J1, J2, J4 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical_SMD_Pin1Right | J6 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical_SMD_Pin1Right | J7 |
| 1 | MDL 5 | Fuseholder_Clip-6.3x32mm_Littelfuse_102_Inline_P34.21x7.62mm_D2.54mm_Horizontal | F1 |
| 4 | TC33X-2-103E 3296W-1-103LF Bourns Inc. | Potentiometer_Bourns_3296W_Vertical | POT1, POT2, POT3, POT4 |
| 1 | 5 ohms - 4.5amp | RV_Disc_D7mm_W4.5mm_P5mm | RT1 |
| 3 | TestPoint_Small | PinHeader_1x01_P2.54mm_Vertical | TP1, TP2, TP3 |
| 6 | TestPoint_Small | PinHeader_1x01_P1.00mm_Vertical | TP4, TP5, TP6, TP7, TP8, TP9 |
| 2 | BAT54C,215 Nexperia | SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | D1, D8 |
| 4 | 1SMA4742A hongjiacheng | D_DO-214AC(SMA) | D2, D6, D9, D13 |
Show 42 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SMBJ6.0CA hongjiacheng | D_SMB | D3, D11 |
| 2 | Green Hubei KENTO Elec | D_0805 | D4, D12 |
| 3 | SS54B hongjiacheng | D_SMB | D5, D10, D18 |
| 4 | 1N5819WS Guangdong Hottech | D_SOD-323 | D7, D14, D17, D20 |
| 2 | Yellow Hubei KENTO Elec | D_0805 | D15, D19 |
| 1 | Red Foshan NationStar Optoelectronics | D_0805 | D16 |
| 2 | L_Ferrite | L_1206_3216Metric | L1, L4 |
| 3 | 33uh | L_Sunlord_MWSA1003S | L2, L3, L5 |
| 26 | 100nF YAGEO | C_0805 | C1, C3, C9, C11, C12, C15, C16, C24 +18 |
| 2 | 100pF Samsung Electro-Mechanics | C_0805_2012Metric | C2, C14 |
| 2 | 470uf 25V | CP_Elec_10x10.5 | C4, C30 |
| 5 | 100nF Samsung Electro-Mechanics | C_0805_2012Metric | C5, C18, C20, C28, C38 |
| 2 | 470uf | CP_Elec_10x10 | C6, C22 |
| 4 | 10uF Murata Electronics | C_0805 | C7, C10, C21, C23 |
| 3 | 330uF 25v | CP_Elec_10x10.5 | C8, C19, C32 |
| 2 | 1nF Samsung Electro-Mechanics | C_0805_2012Metric | C13, C25 |
| 1 | 470uf 50v | CP_Elec_10x10.5 | C17 |
| 1 | 100pF Samsung Electro-Mechanics | C_0805 | C26 |
| 4 | 1nF Samsung Electro-Mechanics | C_0805 | C27, C37, C42, C50 |
| 1 | 1000uf 25v | C_Elec_10x10.2 | C29 |
| 6 | 100Ω UNI-ROYAL(Uniroyal Elec) | R_0805 | R1, R10, R18, R25, R44, R52 |
| 9 | 1kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R2, R5, R28, R33, R56, R57, R76, R80 +1 |
| 1 | 1.8kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R3 |
| 19 | 10Ω UNI-ROYAL(Uniroyal Elec) | R_0805 | R4, R8, R12, R15, R17, R20, R23, R34 +11 |
| 16 | 100kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R6, R9, R21, R22, R26, R27, R36, R48 +8 |
| 1 | 20mΩ | R_2512_6332Metric | R7 |
| 3 | 0Ω UNI-ROYAL(Uniroyal Elec) | R_1206 | R11, R35, R68 |
| 2 | 33kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R13, R29 |
| 16 | 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R14, R39, R42, R43, R58, R62, R63, R70 +8 |
| 3 | 270Ω UNI-ROYAL(Uniroyal Elec) | R_0805 | R16, R47, R54 |
| 1 | 200mΩ | R_2512_6332Metric | R19 |
| 2 | 47kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R24, R50 |
| 2 | 680Ω UNI-ROYAL(Uniroyal Elec) | R_0805 | R30, R69 |
| 1 | 820Ω UNI-ROYAL(Uniroyal Elec) | R_0805 | R31 |
| 1 | 0Ω UNI-ROYAL(Uniroyal Elec) | R_0805 | R32 |
| 1 | 20m ohms | R_2512_6332Metric | R37 |
| 1 | 200m ohms | R_2512_6332Metric | R45 |
| 1 | 3100 UNI-ROYAL(Uniroyal Elec) | R_0805 | R61 |
| 1 | 10mohm UNI-ROYAL(Uniroyal Elec) | R_0805 | R64 |
| 1 | 1k UNI-ROYAL(Uniroyal Elec) | R_0805 | R65 |
| 8 | 510kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R66, R67, R73, R74, R86, R87, R93, R94 |
| 4 | 390kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R77, R85, R96, R99 |
DSP-Regulator-RevC design files
The KiCad project lives in the Phil-CIA/Development-Station-Power-Supply repository on GitHub; these links point at the commit this page was built from.
DSP-Regulator-RevC: common questions
How big is the DSP-Regulator-RevC PCB?
The DSP-Regulator-RevC measures 100 × 125 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DSP-Regulator-RevC?
226 components, from 62 distinct parts. The full bill of materials is listed on this page.
Where can I download the DSP-Regulator-RevC design files?
From the Phil-CIA/Development-Station-Power-Supply repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DSP-Regulator-RevC design in my own project?
The repository has no license, so all rights stay with Phil-CIA. Use it as a reference, and ask the author before reusing the design.
More boards in Development-Station-Power-Supply
ESP32
DSP-Regulator-HAT-RevC
Phil-CIA
100 × 102.6 mm158 parts2LNo license0STM32
DSP-Regulator-HAT-RevB
Phil-CIA
100 × 102.6 mm158 parts2LNo license0ESP32
DSP Regulator hat
Phil-CIA
100 × 100 mm130 parts2LNo license0DSP-Regulator-RevB
Phil-CIA
100 × 100 mm88 parts2LNo license0USB Hub
Phil-CIA
100 × 50 mm76 parts4LNo license0USB Hub Next Iter
Phil-CIA
100 × 50 mm76 parts4LNo license0Front display board
Phil-CIA
125 × 75 mm42 parts2LNo license0
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k