Kh gift hw
phonght32·kh-gift-hw
About the Kh gift hw PCB
Kh gift hw is an open source ESP32 PCB design by phonght32, published on GitHub under the MIT license. It is a 2-layer board measuring 89.3 × 55 mm, with 69 components from 43 distinct parts.
Its main chip is the ESP32-WROVER, from the ESP32 family. Other key parts include the DHT11, TP4056, DW01A, CP2102N-AXX-XQFN28 and SX1308. By type, the board carries 21 resistors, 16 capacitors, 10 ICs, 8 diodes, 3 transistors and 3 connectors.
It belongs with the power & battery designs in this gallery.

Main components on the Kh gift hw
Kh gift hw bill of materials (BOM)
69 components, 43 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DHT11 | SNR4-2.54-15.5X12.0X5.5MM | U1 |
| 1 | ESP32-WROVER | ESP32-WROVER | U2 |
| 1 | TP4056 | SOP127P600X175-9N | U3 |
| 1 | DW01A | TSOT-23-6 | U4 |
| 1 | CP2102N-AXX-XQFN28 CP2102N-Axx-xQFN28 | QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U6 |
| 1 | SX1308 | TSOT-23-6 | U7 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U8 |
| 1 | DS1307Z+ | SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 2 | IRLML0030 | SOT-23 | U10, U12 |
| 1 | MMBT5550 | SOT-23 | Q1 |
| 2 | MMBT2222A | SOT-23 | Q4, Q5 |
| 1 | 32768 kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | CONN_01X14 Conn_01x14 | ili9341_3.2inch | J2 |
| 1 | USB | JST_EH_S4B-EH_1x04_P2.5mm_Horizontal | J3 |
| 1 | Potentiometer | Connector_ZH_1x03_P1.25mm_Horizontal | RV1 |
| 1 | PinLipo | JST_EH_S2B-EH_1x02_P2.5mm_Horizontal | BT1 |
| 1 | Cell | BAT_CR1220_Holder | BT2 |
| 1 | Buzzer | MagneticBuzzer_Kobitone_254-EMB84Q-RO | BZ1 |
| 2 | SW_Push | PushButton_6x6mm_SMD | SW1, SW2 |
| 1 | SW_Push | Connector_ZH_1x02_P1.25mm_Horizontal | SW3 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GREEN | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | RED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | SS24 | D_SMA | D3 |
| 1 | YELLOW | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | GREEN | Connector_ZH_1x02_P1.25mm_Horizontal | D5 |
| 1 | RED | Connector_ZH_1x02_P1.25mm_Horizontal | D6 |
| 1 | TX | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D7 |
| 1 | RX | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D8 |
| 1 | 0.1H | L_Coilcraft_XAL5030-XXX | L1 |
| 2 | 100NF 100nF | C_1210_3225Metric | C1, C2 |
| 6 | 10UF 10uF | C_1210_3225Metric | C3, C5, C11, C12, C14, C15 |
| 6 | 100NF 100nF | C_0603_1608Metric | C4, C6, C7, C8, C13, C16 |
| 1 | 10UF 10uF | C_0603_1608Metric | C9 |
| 1 | 0.1UF 0.1uF | C_1210_3225Metric | C10 |
| 1 | NC | R_0603_1608Metric | R1 |
| 4 | 1k | R_0603_1608Metric | R2, R3, R4, R10 |
| 6 | 10K 10k | R_0603_1608Metric | R5, R6, R7, R11, R15, R16 |
| 1 | 1.2K 1.2k | R_0603_1608Metric | R8 |
| 1 | 0R | R_0603_1608Metric | R9 |
| 1 | 100R | R_0603_1608Metric | R12 |
| 3 | 330R | R_0603_1608Metric | R13, R14, R21 |
| 2 | TBD | R_0603_1608Metric | R17, R18 |
| 2 | 4K7 | R_0603_1608Metric | R19, R20 |
Kh gift hw design files
The KiCad project lives in the phonght32/kh-gift-hw repository on GitHub; these links point at the commit this page was built from.
Kh gift hw: common questions
What microcontroller does the Kh gift hw use?
The Kh gift hw is built around the ESP32-WROVER, from the ESP32 family.
How big is the Kh gift hw PCB?
The Kh gift hw measures 89.3 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kh gift hw?
69 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Kh gift hw design files?
From the phonght32/kh-gift-hw repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Kh gift hw design in my own project?
Yes, under the terms of its MIT license, which phonght32 chose for the repository.
Can I test firmware for the Kh gift hw without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k