Active-FPix
psi46·psi46-pcb·Active-FPix/active-FPix.kicad_pcb
About the Active-FPix PCB
Active-FPix is an open source PCB design by psi46, published on GitHub. It is a 4-layer board measuring 100 × 40 mm, with 52 components from 35 distinct parts.
Other key parts include the 24C02 and TPS769XX. By type, the board carries 23 resistors, 18 connectors, 5 capacitors, 2 ICs, 2 jumpers and 1 fuse.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Contains the following PCB: - Module PCB - module-adapter-FPix: The module adapter used to connect FPix modules to a DTB - module-adapter-active-BPix: The module adapter to be used to connect BPix modules to a DTB over a low-impedance cable. Has active components on it to refresh
Contains the following PCB: - Module PCB - module-adapter-FPix: The module adapter used to connect FPix modules to a DTB - module-adapter-active-BPix: The module adapter to be used to connect BPix modules to a DTB over a low-impedance cable. Has active components on it to refresh signals. - Single ROC PCB - singleroc-adapter-testbeam: A shortened version of the PSI single ROC adapter - singleroc-carrier-testbeam: - Test PCB - module-DTBtest-FPix: A board that resembles the passive/ohmic behaviour of a FPix module to test DTB readings of IA, ID, RTD-temperature and HV
Main components on the Active-FPix
Active-FPix bill of materials (BOM)
52 components, 35 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 24C02 | SO8N | U1 |
| 1 | TPS769XX | SOT-23-5 | U2 |
| 1 | CONN-SCSI68 | SCSI68up | J1 |
| 1 | CONN-SMK20 | SMK20hv | J2 |
| 1 | OutA+ | testpad | P1 |
| 1 | OutA- | testpad | P2 |
| 1 | RDa+ | testpad | P3 |
| 1 | VA | testpad | P4 |
| 1 | RDa- | testpad | P5 |
| 1 | SDA+ | testpad | P6 |
| 1 | SDA- | testpad | P7 |
| 1 | CTR+ | testpad | P8 |
| 1 | 3V3 | testpad | P9 |
| 1 | VD | testpad | P10 |
| 1 | CTR- | testpad | P11 |
| 1 | CLK+ | testpad | P12 |
| 1 | CLK- | testpad | P13 |
| 1 | GND | testpad | P14 |
| 1 | RTD+ | testpad | P15 |
| 1 | RTD- | testpad | P16 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FUSE | SM0603 | F1 |
| 1 | JUMPER | HarwinShortLnk | JP1 |
| 1 | JUMPER | PIN_ARRAY_2X1 | JP2 |
| 1 | LED | LED-0603 | D1 |
| 3 | 100n | SM0603 | C1, C3, C4 |
| 2 | 1U | SM0603 | C2, C5 |
| 1 | R | SM0402 | R3 |
| 2 | 0 | SM0402 | R5, R8 |
| 4 | 10G | SM0402 | R6, R10, R14, R18 |
| 1 | 120 | SM0402 | R7 |
| 6 | 39 | SM0402 | R9, R12, R13, R16, R17, R20 |
| 3 | 91 | SM0402 | R11, R15, R19 |
| 1 | 56 | SM0603 | R21 |
| 3 | 10k 0.1% | SM0603 | R22, R25, R26 |
| 2 | 10k 5% | SM0603 | R23, R24 |
Active-FPix design files
The KiCad project lives in the psi46/psi46-pcb repository on GitHub; these links point at the commit this page was built from.
Active-FPix: common questions
How big is the Active-FPix PCB?
The Active-FPix measures 100 × 40 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Active-FPix?
52 components, from 35 distinct parts. The full bill of materials is listed on this page.
Where can I download the Active-FPix design files?
From the psi46/psi46-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Active-FPix design in my own project?
The repository has no license, so all rights stay with psi46. Use it as a reference, and ask the author before reusing the design.
More boards in psi46-pcb
FPix2DTB up
psi46
100 × 40 mm56 parts4LNo license0FPix2DTB 90deg up
psi46
100 × 40 mm52 parts4LNo license0Singleroc adapter tb2
psi46
64 × 50.8 mm30 parts2LNo license0Singleroc adapter tb
psi46
64 × 52 mm28 parts2LNo license0Module adapter tb
psi46
30.5 × 64 mm27 parts4LNo license0Singleroc adapter tb2-rot2
psi46
64 × 65.5 mm24 parts4LNo license0Singleroc adapter tb2-rot
psi46
64 × 69.1 mm24 parts4LNo license0FPixDTBtestload
psi46
100 × 40 mm11 parts2LNo license0Cable Adapter
psi46
40 × 40 mm4 parts2LNo license0
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979