Singleroc adapter tb2-rot
psi46·psi46-pcb·singleroc-adapter-testbeam/singleroc-adapter-tb2-rot.kicad_pcb
About the Singleroc adapter tb2-rot PCB
Singleroc adapter tb2-rot is an open source PCB design by psi46, published on GitHub. It is a 4-layer board measuring 64 × 69.1 mm, with 24 components from 10 distinct parts.
By type, the board carries 11 capacitors, 9 resistors, 3 connectors and 1 fuse.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Contains the following PCB: - Module PCB - module-adapter-FPix: The module adapter used to connect FPix modules to a DTB - module-adapter-active-BPix: The module adapter to be used to connect BPix modules to a DTB over a low-impedance cable. Has active components on it to refresh
Contains the following PCB: - Module PCB - module-adapter-FPix: The module adapter used to connect FPix modules to a DTB - module-adapter-active-BPix: The module adapter to be used to connect BPix modules to a DTB over a low-impedance cable. Has active components on it to refresh signals. - Single ROC PCB - singleroc-adapter-testbeam: A shortened version of the PSI single ROC adapter - singleroc-carrier-testbeam: - Test PCB - module-DTBtest-FPix: A board that resembles the passive/ohmic behaviour of a FPix module to test DTB readings of IA, ID, RTD-temperature and HV
Singleroc adapter tb2-rot bill of materials (BOM)
24 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | — | 40_PIN_EDGE_CONNECTOR_MINI_CARD_BACKSIDE | J1 |
| 1 | — | SCSI68 | J2 |
| 1 | — | Pin_Header_Angled_1x02 | P1 |
| 1 | — | Fuse_SMD1206_HandSoldering | F1 |
| 6 | 100nF | SM0603_Capa | C1, C2, C3, C4, C5, C8 |
| 3 | 1uF | SM0603_Capa | C6, C7, C9 |
| 2 | 100n | SM0603_Capa | C10, C11 |
| 4 | 100R | SM0603 | R1, R2, R3, R4 |
| 2 | 10k 5% | SM0603 | R5, R6 |
| 3 | 10k 0.1% | SM0603 | R7, R8, R9 |
Singleroc adapter tb2-rot design files
The KiCad project lives in the psi46/psi46-pcb repository on GitHub; these links point at the commit this page was built from.
Singleroc adapter tb2-rot: common questions
How big is the Singleroc adapter tb2-rot PCB?
The Singleroc adapter tb2-rot measures 64 × 69.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Singleroc adapter tb2-rot?
24 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Singleroc adapter tb2-rot design files?
From the psi46/psi46-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Singleroc adapter tb2-rot design in my own project?
The repository has no license, so all rights stay with psi46. Use it as a reference, and ask the author before reusing the design.
More boards in psi46-pcb
FPix2DTB up
psi46
100 × 40 mm56 parts4LNo license0FPix2DTB 90deg up
psi46
100 × 40 mm52 parts4LNo license0Active-FPix
psi46
100 × 40 mm52 parts4LNo license0Singleroc adapter tb2
psi46
64 × 50.8 mm30 parts2LNo license0Singleroc adapter tb
psi46
64 × 52 mm28 parts2LNo license0Module adapter tb
psi46
30.5 × 64 mm27 parts4LNo license0Singleroc adapter tb2-rot2
psi46
64 × 65.5 mm24 parts4LNo license0FPixDTBtestload
psi46
100 × 40 mm11 parts2LNo license0Cable Adapter
psi46
40 × 40 mm4 parts2LNo license0
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979