Singleroc adapter tb2
psi46·psi46-pcb·singleroc-adapter-testbeam/singleroc-adapter-tb2.kicad_pcb
About the Singleroc adapter tb2 PCB
Singleroc adapter tb2 is an open source PCB design by psi46, published on GitHub. It is a 2-layer board measuring 64 × 50.8 mm, with 30 components from 11 distinct parts.
By type, the board carries 11 capacitors, 9 resistors, 3 connectors and 1 fuse.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Contains the following PCB: - Module PCB - module-adapter-FPix: The module adapter used to connect FPix modules to a DTB - module-adapter-active-BPix: The module adapter to be used to connect BPix modules to a DTB over a low-impedance cable. Has active components on it to refresh
Contains the following PCB: - Module PCB - module-adapter-FPix: The module adapter used to connect FPix modules to a DTB - module-adapter-active-BPix: The module adapter to be used to connect BPix modules to a DTB over a low-impedance cable. Has active components on it to refresh signals. - Single ROC PCB - singleroc-adapter-testbeam: A shortened version of the PSI single ROC adapter - singleroc-carrier-testbeam: - Test PCB - module-DTBtest-FPix: A board that resembles the passive/ohmic behaviour of a FPix module to test DTB readings of IA, ID, RTD-temperature and HV
Singleroc adapter tb2 bill of materials (BOM)
30 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | — | 40_PIN_EDGE_CONNECTOR_MINI_CARD_BACKSIDE | J1 |
| 1 | — | SCSI68 | J2 |
| 1 | — | Pin_Header_Angled_1x02 | P1 |
| 1 | — | Fuse_SMD1206_HandSoldering | F1 |
| 6 | — | 1pin | RF1B, RF1T, RF2B, RF2T, RF3B, RF3T |
| 6 | 100nF | SM0603_Capa | C1, C2, C3, C4, C5, C8 |
| 3 | 1uF | SM0603_Capa | C6, C7, C9 |
| 2 | 100n | SM0603_Capa | C10, C11 |
| 4 | 100R | SM0603 | R1, R2, R3, R4 |
| 2 | 10k 5% | SM0603 | R5, R6 |
| 3 | 10k 0.1% | SM0603 | R7, R8, R9 |
Singleroc adapter tb2 design files
The KiCad project lives in the psi46/psi46-pcb repository on GitHub; these links point at the commit this page was built from.
Singleroc adapter tb2: common questions
How big is the Singleroc adapter tb2 PCB?
The Singleroc adapter tb2 measures 64 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Singleroc adapter tb2?
30 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Singleroc adapter tb2 design files?
From the psi46/psi46-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Singleroc adapter tb2 design in my own project?
The repository has no license, so all rights stay with psi46. Use it as a reference, and ask the author before reusing the design.
More boards in psi46-pcb
FPix2DTB up
psi46
100 × 40 mm56 parts4LNo license0FPix2DTB 90deg up
psi46
100 × 40 mm52 parts4LNo license0Active-FPix
psi46
100 × 40 mm52 parts4LNo license0Singleroc adapter tb
psi46
64 × 52 mm28 parts2LNo license0Module adapter tb
psi46
30.5 × 64 mm27 parts4LNo license0Singleroc adapter tb2-rot2
psi46
64 × 65.5 mm24 parts4LNo license0Singleroc adapter tb2-rot
psi46
64 × 69.1 mm24 parts4LNo license0FPixDTBtestload
psi46
100 × 40 mm11 parts2LNo license0Cable Adapter
psi46
40 × 40 mm4 parts2LNo license0
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979