FPixDTBtestload

psi46·psi46-pcb·module-DTBtest-FPix/FPixDTBtestload.kicad_pcb

FPixDTBtestload PCB layout, top view — open source board by psi46

About the FPixDTBtestload PCB

FPixDTBtestload is an open source PCB design by psi46, published on GitHub. It is a 2-layer board measuring 100 × 40 mm, with 11 components from 9 distinct parts.

By type, the board carries 8 resistors, 2 connectors and 1 jumper.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Contains the following PCB: - Module PCB - module-adapter-FPix: The module adapter used to connect FPix modules to a DTB - module-adapter-active-BPix: The module adapter to be used to connect BPix modules to a DTB over a low-impedance cable. Has active components on it to refresh

Contains the following PCB: - Module PCB - module-adapter-FPix: The module adapter used to connect FPix modules to a DTB - module-adapter-active-BPix: The module adapter to be used to connect BPix modules to a DTB over a low-impedance cable. Has active components on it to refresh signals. - Single ROC PCB - singleroc-adapter-testbeam: A shortened version of the PSI single ROC adapter - singleroc-carrier-testbeam: - Test PCB - module-DTBtest-FPix: A board that resembles the passive/ohmic behaviour of a FPix module to test DTB readings of IA, ID, RTD-temperature and HV

FPixDTBtestload bill of materials (BOM)

11 components, 9 distinct parts.

QtyPartRefs
1
CONN-SMK20
J1
1
GND
P14
1
JUMPER
JP1
1
10k 0.1%
R1
1
976 0.1%
R2
1
25 MEG
R3
2
3.2
R4, R5
2
4.8
R6, R7
1
41.2k 0.1%
R8

FPixDTBtestload design files

The KiCad project lives in the psi46/psi46-pcb repository on GitHub; these links point at the commit this page was built from.

FPixDTBtestload: common questions

How big is the FPixDTBtestload PCB?

The FPixDTBtestload measures 100 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the FPixDTBtestload?

11 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the FPixDTBtestload design files?

From the psi46/psi46-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the FPixDTBtestload design in my own project?

The repository has no license, so all rights stay with psi46. Use it as a reference, and ask the author before reusing the design.

More boards in psi46-pcb

Similar boards