Singleroc adapter tb

psi46·psi46-pcb·singleroc-adapter-testbeam/singleroc-adapter-tb.kicad_pcb

Singleroc adapter tb PCB layout, top view — open source board by psi46

About the Singleroc adapter tb PCB

Singleroc adapter tb is an open source PCB design by psi46, published on GitHub. It is a 2-layer board measuring 64 × 52 mm, with 28 components from 11 distinct parts.

By type, the board carries 11 capacitors, 9 resistors, 3 connectors and 1 fuse.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Contains the following PCB: - Module PCB - module-adapter-FPix: The module adapter used to connect FPix modules to a DTB - module-adapter-active-BPix: The module adapter to be used to connect BPix modules to a DTB over a low-impedance cable. Has active components on it to refresh

Contains the following PCB: - Module PCB - module-adapter-FPix: The module adapter used to connect FPix modules to a DTB - module-adapter-active-BPix: The module adapter to be used to connect BPix modules to a DTB over a low-impedance cable. Has active components on it to refresh signals. - Single ROC PCB - singleroc-adapter-testbeam: A shortened version of the PSI single ROC adapter - singleroc-carrier-testbeam: - Test PCB - module-DTBtest-FPix: A board that resembles the passive/ohmic behaviour of a FPix module to test DTB readings of IA, ID, RTD-temperature and HV

Singleroc adapter tb bill of materials (BOM)

28 components, 11 distinct parts.

QtyPartRefs
1
CONN_40
J1
1
CONN-SCSI68
J2
1
CONN_2
P1
4
P***
1PIN, 2PIN, 3PIN, 4PIN
1
FUSE
F1
6
100nF
C1, C2, C3, C4, C5, C8
3
1uF
C6, C7, C9
2
100n
C10, C11
4
100R
R1, R2, R3, R4
2
10k 5%
R5, R6
3
10k 0.1%
R7, R8, R9

Singleroc adapter tb design files

The KiCad project lives in the psi46/psi46-pcb repository on GitHub; these links point at the commit this page was built from.

Singleroc adapter tb: common questions

How big is the Singleroc adapter tb PCB?

The Singleroc adapter tb measures 64 × 52 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Singleroc adapter tb?

28 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Singleroc adapter tb design files?

From the psi46/psi46-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Singleroc adapter tb design in my own project?

The repository has no license, so all rights stay with psi46. Use it as a reference, and ask the author before reusing the design.

More boards in psi46-pcb

Similar boards