FPix2DTB 90deg up

psi46·psi46-pcb·module-adapter-active-FPix/FPix2DTB_90deg_up.kicad_pcb

FPix2DTB 90deg up PCB layout, top view — open source board by psi46

About the FPix2DTB 90deg up PCB

FPix2DTB 90deg up is an open source PCB design by psi46, published on GitHub. It is a 4-layer board measuring 100 × 40 mm, with 52 components from 35 distinct parts.

Other key parts include the 24C02 and TPS769XX. By type, the board carries 23 resistors, 18 connectors, 5 capacitors, 2 ICs, 2 jumpers and 1 fuse.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Contains the following PCB: - Module PCB - module-adapter-FPix: The module adapter used to connect FPix modules to a DTB - module-adapter-active-BPix: The module adapter to be used to connect BPix modules to a DTB over a low-impedance cable. Has active components on it to refresh

Contains the following PCB: - Module PCB - module-adapter-FPix: The module adapter used to connect FPix modules to a DTB - module-adapter-active-BPix: The module adapter to be used to connect BPix modules to a DTB over a low-impedance cable. Has active components on it to refresh signals. - Single ROC PCB - singleroc-adapter-testbeam: A shortened version of the PSI single ROC adapter - singleroc-carrier-testbeam: - Test PCB - module-DTBtest-FPix: A board that resembles the passive/ohmic behaviour of a FPix module to test DTB readings of IA, ID, RTD-temperature and HV

Main components on the FPix2DTB 90deg up

24C02TPS769XX

FPix2DTB 90deg up bill of materials (BOM)

52 components, 35 distinct parts.

QtyPartRefs
1
24C02
U1
1
TPS769XX
U2
1
CONN-SCSI68
J1
1
CONN-SMK20
J2
1
OutA+
P1
1
OutA-
P2
1
RDa+
P3
1
VA
P4
1
RDa-
P5
1
SDA+
P6
1
SDA-
P7
1
CTR+
P8
1
3V3
P9
1
VD
P10
1
CTR-
P11
1
CLK+
P12
1
CLK-
P13
1
GND
P14
1
RTD+
P15
1
RTD-
P16
Show 15 more
QtyPartRefs
1
FUSE
F1
1
JUMPER
JP1
1
JUMPER
JP2
1
LED
D1
3
100n
C1, C3, C4
2
1U
C2, C5
1
R
R3
2
0
R5, R8
4
10G
R6, R10, R14, R18
1
120
R7
6
39
R9, R12, R13, R16, R17, R20
3
91
R11, R15, R19
1
56
R21
3
10k 0.1%
R22, R25, R26
2
10k 5%
R23, R24

FPix2DTB 90deg up design files

The KiCad project lives in the psi46/psi46-pcb repository on GitHub; these links point at the commit this page was built from.

FPix2DTB 90deg up: common questions

How big is the FPix2DTB 90deg up PCB?

The FPix2DTB 90deg up measures 100 × 40 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the FPix2DTB 90deg up?

52 components, from 35 distinct parts. The full bill of materials is listed on this page.

Where can I download the FPix2DTB 90deg up design files?

From the psi46/psi46-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the FPix2DTB 90deg up design in my own project?

The repository has no license, so all rights stay with psi46. Use it as a reference, and ask the author before reusing the design.

More boards in psi46-pcb

Similar boards