Cable Adapter
psi46·psi46-pcb·module-adapter-FPix/CableAdapter.kicad_pcb
About the Cable Adapter PCB
Cable Adapter is an open source PCB design by psi46, published on GitHub. It is a 2-layer board measuring 40 × 40 mm, with 4 components from 2 distinct parts.
By type, the board carries 2 connectors and 2 resistors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Contains the following PCB: - Module PCB - module-adapter-FPix: The module adapter used to connect FPix modules to a DTB - module-adapter-active-BPix: The module adapter to be used to connect BPix modules to a DTB over a low-impedance cable. Has active components on it to refresh
Contains the following PCB: - Module PCB - module-adapter-FPix: The module adapter used to connect FPix modules to a DTB - module-adapter-active-BPix: The module adapter to be used to connect BPix modules to a DTB over a low-impedance cable. Has active components on it to refresh signals. - Single ROC PCB - singleroc-adapter-testbeam: A shortened version of the PSI single ROC adapter - singleroc-carrier-testbeam: - Test PCB - module-DTBtest-FPix: A board that resembles the passive/ohmic behaviour of a FPix module to test DTB readings of IA, ID, RTD-temperature and HV
Cable Adapter bill of materials (BOM)
4 components, 2 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CONN-SMK20 | SMK20hv | J1, J2 |
| 2 | 60 | SM0402 | R1, R2 |
Cable Adapter design files
The KiCad project lives in the psi46/psi46-pcb repository on GitHub; these links point at the commit this page was built from.
Cable Adapter: common questions
How big is the Cable Adapter PCB?
The Cable Adapter measures 40 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cable Adapter?
4 components, from 2 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cable Adapter design files?
From the psi46/psi46-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Cable Adapter design in my own project?
The repository has no license, so all rights stay with psi46. Use it as a reference, and ask the author before reusing the design.
More boards in psi46-pcb
FPix2DTB up
psi46
100 × 40 mm56 parts4LNo license0FPix2DTB 90deg up
psi46
100 × 40 mm52 parts4LNo license0Active-FPix
psi46
100 × 40 mm52 parts4LNo license0Singleroc adapter tb2
psi46
64 × 50.8 mm30 parts2LNo license0Singleroc adapter tb
psi46
64 × 52 mm28 parts2LNo license0Module adapter tb
psi46
30.5 × 64 mm27 parts4LNo license0Singleroc adapter tb2-rot2
psi46
64 × 65.5 mm24 parts4LNo license0Singleroc adapter tb2-rot
psi46
64 × 69.1 mm24 parts4LNo license0FPixDTBtestload
psi46
100 × 40 mm11 parts2LNo license0
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979