Module adapter tb

psi46·psi46-pcb·module-adapter-active-BPix/module-adapter-tb.kicad_pcb

Module adapter tb layout, top view — open source board by psi46

About the Module adapter tb

Module adapter tb is an open source PCB design by psi46, published on GitHub. It is a 4-layer board measuring 30.5 × 64 mm, with 27 components from 10 distinct parts.

Other key parts include the DLT and TPS769XX. By type, the board carries 18 resistors, 4 capacitors, 2 ICs and 2 connectors.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Contains the following PCB: - Module PCB - module-adapter-FPix: The module adapter used to connect FPix modules to a DTB - module-adapter-active-BPix: The module adapter to be used to connect BPix modules to a DTB over a low-impedance cable. Has active components on it to refresh

Contains the following PCB: - Module PCB - module-adapter-FPix: The module adapter used to connect FPix modules to a DTB - module-adapter-active-BPix: The module adapter to be used to connect BPix modules to a DTB over a low-impedance cable. Has active components on it to refresh signals. - Single ROC PCB - singleroc-adapter-testbeam: A shortened version of the PSI single ROC adapter - singleroc-carrier-testbeam: - Test PCB - module-DTBtest-FPix: A board that resembles the passive/ohmic behaviour of a FPix module to test DTB readings of IA, ID, RTD-temperature and HV

Main components on the Module adapter tb

DLTTPS769XX

Module adapter tb bill of materials (BOM)

27 components, 10 distinct parts.

QtyPartRefs
1
DLT
U1
1
TPS769XX
U2
2
CONN_2
P1, P2
1
Val**
PIN_ARRAY_1
1
TESTBOARD_SCSI_CONN
C1
1
MOLEX_BPIX_L2
C2
2
C
C5, C6
6
R
R1, R2, R3, R10, R11, R12
8
R43
R4, R5, R7, R8, R13, R14, R16, R17
4
R68
R6, R9, R15, R18

Module adapter tb design files

The KiCad project lives in the psi46/psi46-pcb repository on GitHub; these links point at the commit this page was built from.

Module adapter tb: common questions

How big is the Module adapter tb?

The Module adapter tb measures 30.5 × 64 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Module adapter tb?

27 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the Module adapter tb design files?

From the psi46/psi46-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Module adapter tb design in my own project?

The repository has no license, so all rights stay with psi46. Use it as a reference, and ask the author before reusing the design.

More boards in psi46-pcb

Similar boards