EEG EMT 32
Raigetix·EEG_EMT_32·Hardware/EEG/EEG.kicad_pcb
About the EEG EMT 32 PCB
EEG EMT 32 is an open source ESP32 PCB design by Raigetix, published on GitHub. It is a 2-layer board measuring 60 × 80 mm, with 115 components from 36 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AD7771BCPZ, TPD4E001DRLR, LM317L_SO8, TPS563200 and LM2776. By type, the board carries 39 capacitors, 33 resistors, 16 transistors, 13 ICs, 9 connectors and 1 crystal.
Main components on the EEG EMT 32
EEG EMT 32 bill of materials (BOM)
115 components, 36 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AD7771BCPZ | QFN-64-1EP_9x9mm_P0.5mm_EP7.35x7.35mm | IC1 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 4 | TPD4E001DRLR | Texas_R-PDSO-N6_DRL-6 | U2, U3, U4, U5 |
| 1 | LM317L_SO8 | SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | TPS563200 | SOT-23-6 | U7 |
| 1 | LM2776 | SOT-23-6 | U8 |
| 1 | LM337L_SO8 | SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 2 | LM324 | TSSOP-14_4.4x5mm_P0.65mm | U10, U11 |
| 1 | DAC5578XPW DAC5578xPW | TSSOP-16_4.4x5mm_P0.65mm | U12 |
| 8 | BC817 | SOT-23 | Q1, Q3, Q5, Q7, Q9, Q11, Q13, Q15 |
| 8 | BC807 | SOT-23 | Q2, Q4, Q6, Q8, Q10, Q12, Q14, Q16 |
| 1 | CRYSTAL_GND24 Crystal_GND24 | Crystal_SMD_SeikoEpson_FA238V-4Pin_3.2x2.5mm | Y1 |
| 1 | 1NF 1nF | R_Array_Convex_4x0603 | CN1 |
| 3 | 1NF 1nF | R_Array_Concave_4x0603 | CN2, CN3, CN4 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_Palconn_UTC16-G | J2 |
| 1 | CONN_01X03 Conn_01x03 | TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J5 |
| 3 | CONN_01X02_SOCKET Conn_01x02_Socket | JST_XA_B02B-XASK-1-A_1x02_P2.50mm_Vertical | J7, J8, J9 |
| 2 | 5.1K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | Rcc1, Rcc2 |
| 1 | SS14 | D_SMA | D1 |
| 1 | WPN4020H4R7MT | L_Vishay_IFSC-1515AH_4x4x1.8mm | L1 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1UF 1uF | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1, C7 |
| 8 | 10NF 10nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C6, C8, C10, C12, C14, C16 |
| 7 | 1UF 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C9, C11, C13, C15, C17, C39 |
| 1 | 100NF 100nf | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5 |
| 2 | 16PF 16pf | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C18, C19 |
| 5 | 100NF 100nf | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | C20, C23, C26, C32, C33 |
| 12 | 47UF 47uf | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C21, C22, C24, C25, C28, C29, C30, C31 +4 |
| 1 | 22PF 22pf | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | C27 |
| 1 | 1UF 1uf | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | C34 |
| 14 | 10K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R4, R6, R15, R16, R17, R18, R23 +6 |
| 2 | 1K2 1k2 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R10 |
| 1 | 33.2K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7 |
| 2 | 390 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 8 | 1K5 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R11, R12, R13, R14, R19, R20, R21, R22 |
| 2 | 4K7 4k7 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R33, R34 |
| 4 | 2.2K | R_Array_Concave_4x0603 | RN1, RN2, RN3, RN4 |
EEG EMT 32 design files
The KiCad project lives in the Raigetix/EEG_EMT_32 repository on GitHub; these links point at the commit this page was built from.
EEG EMT 32: common questions
What microcontroller does the EEG EMT 32 use?
The EEG EMT 32 is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the EEG EMT 32 PCB?
The EEG EMT 32 measures 60 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EEG EMT 32?
115 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the EEG EMT 32 design files?
From the Raigetix/EEG_EMT_32 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the EEG EMT 32 design in my own project?
The repository has no license, so all rights stay with Raigetix. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the EEG EMT 32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k