Retro-Card
rapha-tech·Retro-Card·Hardware/Retro-Card_V1/Retro-Card_V1.kicad_pcb
About the Retro-Card PCB
Retro-Card is an open source ESP32 PCB design by rapha-tech, published on GitHub. It is a 2-layer board measuring 52 × 83 mm, with 62 components from 42 distinct parts.
Its main chip is the ESP32-P4 module, from the ESP32 family. Other key parts include the 74LVC1G17, MT3608, NS4168, TP4054 and SN74LVC1G80DCKR. By type, the board carries 19 resistors, 14 switches, 12 capacitors, 6 ICs, 3 diodes and 2 transistors.
It belongs with the retro computing designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
Small credit card sized console based around the ESP32-P4
This is the repo for my latest ESP32 handheld console: the Retro-Card (Name might change)
In the Hardware folder you'll find 2 versions: - V1 : the current version I'm working on - V0 : an older version I keep for future reference
Main components on the Retro-Card
Retro-Card bill of materials (BOM)
62 components, 42 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-P4 module | WT013P4A1 | U1 |
| 1 | 74LVC1G17 | SOT-353_SC-70-5 | U2 |
| 1 | MT3608 | SOT-23-6 | U3 |
| 1 | NS4168 | HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.3x2.3mm | U4 |
| 1 | TP4054 | SOT-23-5 | U6 |
| 1 | SN74LVC1G80DCKR | SOT-353_SC-70-5 | U7 |
| 1 | NPN_S9013 | SOT-23 | Q1 |
| 1 | CJ3139K | SOT-723 | Q2 |
| 1 | USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | C393941 Micro_SD_Card | micro_sd | J2 |
| 1 | BATTERY_3.7V battery_3.7v | BAT | B1 |
| 1 | ST7789 | ST7789-320x240 | DS1 |
| 1 | CMS16090318SX8 | speaker | LS1 |
| 1 | C2681471 LEFT | metal_dome_d-pad | SW1 |
| 1 | C2927038 L | G-switch side switch | SW3 |
| 1 | C2681471 DOWN | metal_dome_d-pad | SW4 |
| 1 | C2681471 UP | metal_dome_d-pad | SW5 |
| 1 | C2681471 RIGHT | metal_dome_d-pad | SW6 |
| 1 | C2681471 ON/OFF | G-switch side switch | SW7 |
| 1 | C2681471 MENU | micro_sw_plus_grand | SW8 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C2681471 B | metal_dome_ABXY | SW9 |
| 1 | C2681471 A | metal_dome_ABXY | SW10 |
| 1 | C2681471 SELECT | micro_sw_plus_grand | SW11 |
| 1 | C2681471 START | micro_sw_plus_grand | SW12 |
| 1 | C2927038 R | G-switch side switch | SW13 |
| 1 | C2681471 Y | metal_dome_ABXY | SW14 |
| 1 | C2681471 X | metal_dome_ABXY | SW15 |
| 1 | RLED | LED_0603_1608Metric | D1 |
| 1 | DSK24 | D_SOD-123F | D3 |
| 1 | BAT760 | D_SOD-323_HandSoldering | D5 |
| 1 | 4.7UH 4.7uH | L_APV_ANR252012 | L1 |
| 1 | 10UF 10uF | C_0805_2012Metric | C1 |
| 5 | 100NF 100nF | C_0402_1005Metric | C2, C5, C6, C13, C15 |
| 2 | 2.2UF 2.2uF | C_0603_1608Metric | C3, C14 |
| 2 | 22UF 22uF | C_0603_1608Metric | C4, C7 |
| 2 | 1UF 1uF | C_0603_1608Metric | C9, C10 |
| 11 | 10K | R_0402_1005Metric | R1, R2, R5, R6, R9, R13, R17, R18 +3 |
| 1 | 10R | R_0603_1608Metric | R3 |
| 3 | 1K | R_0603_1608Metric | R4, R7, R12 |
| 1 | 7K5 | R_0603_1608Metric | R10 |
| 1 | 2K | R_0603_1608Metric | R11 |
| 2 | 5K1 | R_0603_1608Metric | R15, R16 |
Retro-Card design files
The KiCad project lives in the rapha-tech/Retro-Card repository on GitHub; these links point at the commit this page was built from.
Retro-Card: common questions
What microcontroller does the Retro-Card use?
The Retro-Card is built around the ESP32-P4 module, from the ESP32 family.
How big is the Retro-Card PCB?
The Retro-Card measures 52 × 83 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Retro-Card?
62 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Retro-Card design files?
From the rapha-tech/Retro-Card repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Retro-Card design in my own project?
The repository has no license, so all rights stay with rapha-tech. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Retro-Card without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Earlier revisions in the repo: Retro-Card_V0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k