Team Temp Sensor v0 2

remren·ee193embedded·EE193ConceptualDesign/Team Temp Sensor_v0_2.kicad_pcb

Team Temp Sensor v0 2 PCB layout, top view — open source ESP32 board by remren

About the Team Temp Sensor v0 2 PCB

Team Temp Sensor v0 2 is an open source ESP32 PCB design by remren, published on GitHub. It is a 2-layer board measuring 27.4 × 62.2 mm, with 35 components from 18 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the CP2102N-A02-GQFN28 and LD1117S33TR_SOT223. By type, the board carries 11 capacitors, 11 resistors, 4 diodes, 3 ICs, 2 transistors and 2 connectors.

It belongs with the sensors designs in this gallery, and the repository also holds 3 earlier revisions of it.

From the project

Repository for EE 193 — Networked embedded systems, during Spring 2024. Course taught by Prof. Steven Bell

Main components on the Team Temp Sensor v0 2

Team Temp Sensor v0 2 bill of materials (BOM)

35 components, 18 distinct parts.

QtyPartRefs
1
ESP32-C3-WROOM-02
U1
1
CP2102N-A02-GQFN28
U2
1
LD1117S33TR_SOT223
U3
2
BC818
Q1, Q2
1
USB_B_Micro
J1
1
Battery_Connector
J2
1
SW_DPDT_x2
SW1
1
SW_DIP_x01
SW2
1
MBR0540
D1
3
1N914WT
D2, D3, D4
4
10 uF
C1, C4, C8, C10
3
0.1 uF
C2, C9, C11
2
1 uF
C3, C5
2
22 pF
C6, C7
5
10k
R1, R2, R5, R6, R7
1
47.5k
R3
1
1k
R4
4
0
R8, R9, R10, R11

Team Temp Sensor v0 2 design files

The KiCad project lives in the remren/ee193embedded repository on GitHub; these links point at the commit this page was built from.

Team Temp Sensor v0 2: common questions

What microcontroller does the Team Temp Sensor v0 2 use?

The Team Temp Sensor v0 2 is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How big is the Team Temp Sensor v0 2 PCB?

The Team Temp Sensor v0 2 measures 27.4 × 62.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Team Temp Sensor v0 2?

35 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Team Temp Sensor v0 2 design files?

From the remren/ee193embedded repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Team Temp Sensor v0 2 design in my own project?

The repository has no license, so all rights stay with remren. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Team Temp Sensor v0 2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in ee193embedded

Earlier revisions in the repo: Team Temp Sensor_v0_1a, Team Temp Sensor_v0_1, Team Temp Sensor

Similar boards