Team Temp Sensor v0 2 before routing
remren·ee193embedded·EE193ConceptualDesign/Team Temp Sensor_v0_2_before_routing.kicad_pcb
About the Team Temp Sensor v0 2 before routing PCB
Team Temp Sensor v0 2 before routing is an open source ESP32 PCB design by remren, published on GitHub. It is a 2-layer board measuring 27.4 × 62.2 mm, with 35 components from 18 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the CP2102N-A02-GQFN28 and LD1117S33TR_SOT223. By type, the board carries 11 capacitors, 11 resistors, 4 diodes, 3 ICs, 2 transistors and 2 connectors.
It belongs with the sensors designs in this gallery.
From the project
Repository for EE 193 — Networked embedded systems, during Spring 2024. Course taught by Prof. Steven Bell
Main components on the Team Temp Sensor v0 2 before routing
Team Temp Sensor v0 2 before routing bill of materials (BOM)
35 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U1 |
| 1 | CP2102N-A02-GQFN28 | QFN50P500X500X80-29N | U2 |
| 1 | LD1117S33TR_SOT223 | SOT-223-3_TabPin2 | U3 |
| 2 | BC818 | SOT-23 | Q1, Q2 |
| 1 | USB_B_Micro | USB_Micro-B_GCT_USB3076-30-A | J1 |
| 1 | Battery_Connector | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | SW_DPDT_x2 | PinHeader_1x03_P2.54mm_Vertical | SW1 |
| 1 | SW_DIP_x01 | PinHeader_1x02_P2.54mm_Vertical | SW2 |
| 1 | MBR0540 | D_SOD-123 | D1 |
| 3 | 1N914WT | D_SOD-523 | D2, D3, D4 |
| 4 | 10 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4, C8, C10 |
| 3 | 0.1 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C9, C11 |
| 2 | 1 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C5 |
| 2 | 22 pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7 |
| 5 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R5, R6, R7 |
| 1 | 47.5k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 4 | 0 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9, R10, R11 |
Team Temp Sensor v0 2 before routing design files
The KiCad project lives in the remren/ee193embedded repository on GitHub; these links point at the commit this page was built from.
Team Temp Sensor v0 2 before routing: common questions
What microcontroller does the Team Temp Sensor v0 2 before routing use?
The Team Temp Sensor v0 2 before routing is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the Team Temp Sensor v0 2 before routing PCB?
The Team Temp Sensor v0 2 before routing measures 27.4 × 62.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Team Temp Sensor v0 2 before routing?
35 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Team Temp Sensor v0 2 before routing design files?
From the remren/ee193embedded repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Team Temp Sensor v0 2 before routing design in my own project?
The repository has no license, so all rights stay with remren. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Team Temp Sensor v0 2 before routing without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in ee193embedded
ESP32
TeamTempSensorEE31 v0 4
remren
27.4 × 33.7 mm39 parts2LNo license0ESP32
TeamTempSensorEE31 v0 3-preroute
remren
27.4 × 33.7 mm39 parts2LNo license0ESP32
TeamTempSensorEE31 v0 3a preroute
remren
27.4 × 33.7 mm39 parts2LNo license0ESP32
Team Temp Sensor v0 2
remren
27.4 × 62.2 mm35 parts2LNo license0Hw2breakout
remren
30.5 × 33 mm10 parts2LNo license0First test
remren
7.9 × 15.5 mm3 parts2LNo license0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k