TeamTempSensorEE31 v0 3-preroute
remren·ee193embedded·EE193PreliminaryDesign/TeamTempSensorEE31/Prerouted Versions/TeamTempSensorEE31_v0_3-preroute.kicad_pcb
About the TeamTempSensorEE31 v0 3-preroute PCB
TeamTempSensorEE31 v0 3-preroute is an open source ESP32 PCB design by remren, published on GitHub. It is a 2-layer board measuring 27.4 × 33.7 mm, with 39 components from 22 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the CP2102N-A02-GQFN28, MCP9808_MSOP and LD1117S33TR_SOT223. By type, the board carries 12 resistors, 11 capacitors, 5 diodes, 4 ICs, 4 transistors and 2 connectors.
From the project
Repository for EE 193 — Networked embedded systems, during Spring 2024. Course taught by Prof. Steven Bell
Main components on the TeamTempSensorEE31 v0 3-preroute
TeamTempSensorEE31 v0 3-preroute bill of materials (BOM)
39 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CP2102N-A02-GQFN28 | QFN50P500X500X80-29N | U1 |
| 1 | MCP9808_MSOP | MSOP-8_3x3mm_P0.65mm | U2 |
| 1 | LD1117S33TR_SOT223 | SOT-223-3_TabPin2 | U3 |
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U4 |
| 1 | BS170F | SOT-23 | Q1 |
| 2 | BC818 | SOT-23 | Q2, Q3 |
| 1 | NTA4151PT1G | SOT-416 | Q4 |
| 1 | USB_B_Micro | USB_Micro-B_GCT_USB3076-30-A | J1 |
| 1 | Battery_Connector | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | SW_DIP_x01 | PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 3 | 1N914WT | D_SOD-523 | D1, D2, D3 |
| 1 | MBR0540 | D_SOD-123 | D4 |
| 1 | BAS 52-02V H6327 BAS_52-02V_H6327 | SODFL1608X59N | D5 |
| 2 | 1 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C9 |
| 2 | 22 pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 4 | 10 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C6, C7, C10 |
| 3 | 0.1 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C8, C11 |
| 1 | 47.5k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 4 | 0 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R9, R11, R12 |
| 1 | 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
TeamTempSensorEE31 v0 3-preroute design files
The KiCad project lives in the remren/ee193embedded repository on GitHub; these links point at the commit this page was built from.
TeamTempSensorEE31 v0 3-preroute: common questions
What microcontroller does the TeamTempSensorEE31 v0 3-preroute use?
The TeamTempSensorEE31 v0 3-preroute is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the TeamTempSensorEE31 v0 3-preroute PCB?
The TeamTempSensorEE31 v0 3-preroute measures 27.4 × 33.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TeamTempSensorEE31 v0 3-preroute?
39 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the TeamTempSensorEE31 v0 3-preroute design files?
From the remren/ee193embedded repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the TeamTempSensorEE31 v0 3-preroute design in my own project?
The repository has no license, so all rights stay with remren. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TeamTempSensorEE31 v0 3-preroute without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in ee193embedded
ESP32
TeamTempSensorEE31 v0 4
remren
27.4 × 33.7 mm39 parts2LNo license0ESP32
TeamTempSensorEE31 v0 3a preroute
remren
27.4 × 33.7 mm39 parts2LNo license0ESP32
Team Temp Sensor v0 2
remren
27.4 × 62.2 mm35 parts2LNo license0ESP32
Team Temp Sensor v0 2 before routing
remren
27.4 × 62.2 mm35 parts2LNo license0Hw2breakout
remren
30.5 × 33 mm10 parts2LNo license0First test
remren
7.9 × 15.5 mm3 parts2LNo license0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k