TeamTempSensorEE31 v0 3a preroute
remren·ee193embedded·EE193PreliminaryDesign/TeamTempSensorEE31/Prerouted Versions/TeamTempSensorEE31_v0_3a-preroute.kicad_pcb
About the TeamTempSensorEE31 v0 3a preroute PCB
TeamTempSensorEE31 v0 3a preroute is an open source ESP32 PCB design by remren, published on GitHub. It is a 2-layer board measuring 27.4 × 33.7 mm, with 39 components from 22 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the CP2102N-A02-GQFN28, MCP9808_MSOP and LD1117S33TR_SOT223. By type, the board carries 12 resistors, 11 capacitors, 5 diodes, 4 ICs, 4 transistors and 2 connectors.
From the project
Repository for EE 193 — Networked embedded systems, during Spring 2024. Course taught by Prof. Steven Bell
Main components on the TeamTempSensorEE31 v0 3a preroute
TeamTempSensorEE31 v0 3a preroute bill of materials (BOM)
39 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CP2102N-A02-GQFN28 | QFN50P500X500X80-29N | U1 |
| 1 | MCP9808_MSOP | MSOP-8_3x3mm_P0.65mm | U2 |
| 1 | LD1117S33TR_SOT223 | SOT-223-3_TabPin2 | U3 |
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U4 |
| 1 | BS170F | SOT-23 | Q1 |
| 2 | BC818 | SOT-23 | Q2, Q3 |
| 1 | NTA4151PT1G | SOT-416 | Q4 |
| 1 | USB_B_Micro | USB_Micro-B_GCT_USB3076-30-A | J1 |
| 1 | Battery_Connector | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | SW_DIP_x01 | PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 3 | 1N914WT | D_SOD-523 | D1, D2, D3 |
| 1 | MBR0540 | D_SOD-123 | D4 |
| 1 | BAS 52-02V H6327 BAS_52-02V_H6327 | SODFL1608X59N | D5 |
| 2 | 1 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C9 |
| 2 | 22 pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 4 | 10 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C6, C7, C10 |
| 3 | 0.1 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C8, C11 |
| 1 | 47.5k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 4 | 0 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R9, R11, R12 |
| 1 | 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
TeamTempSensorEE31 v0 3a preroute design files
The KiCad project lives in the remren/ee193embedded repository on GitHub; these links point at the commit this page was built from.
TeamTempSensorEE31 v0 3a preroute: common questions
What microcontroller does the TeamTempSensorEE31 v0 3a preroute use?
The TeamTempSensorEE31 v0 3a preroute is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the TeamTempSensorEE31 v0 3a preroute PCB?
The TeamTempSensorEE31 v0 3a preroute measures 27.4 × 33.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TeamTempSensorEE31 v0 3a preroute?
39 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the TeamTempSensorEE31 v0 3a preroute design files?
From the remren/ee193embedded repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the TeamTempSensorEE31 v0 3a preroute design in my own project?
The repository has no license, so all rights stay with remren. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TeamTempSensorEE31 v0 3a preroute without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in ee193embedded
ESP32
TeamTempSensorEE31 v0 4
remren
27.4 × 33.7 mm39 parts2LNo license0ESP32
TeamTempSensorEE31 v0 3-preroute
remren
27.4 × 33.7 mm39 parts2LNo license0ESP32
Team Temp Sensor v0 2
remren
27.4 × 62.2 mm35 parts2LNo license0ESP32
Team Temp Sensor v0 2 before routing
remren
27.4 × 62.2 mm35 parts2LNo license0Hw2breakout
remren
30.5 × 33 mm10 parts2LNo license0First test
remren
7.9 × 15.5 mm3 parts2LNo license0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k