Pico 2HP
rheslip·2HPico-Eurorack-Module-Hardware·2HPico KiCad design files/Pico 2HP.kicad_pcb
About the Pico 2HP PCB
Pico 2HP is an open source RP2040/RP2350 PCB design by rheslip, published on GitHub. It is a 2-layer board measuring 70 × 30.3 mm, with 52 components from 29 distinct parts.
Its main chip is the RP2350, from the RP2040/RP2350 family. Other key parts include the 74LVC1G3157, AMS1117-5.0, LM4040DBZ-10, PT8211 DAC and TL074. By type, the board carries 21 resistors, 16 capacitors, 7 ICs, 4 connectors and 2 diodes.
It belongs with the audio and displays & leds designs in this gallery.
From the project
2HP Eurorack module based on Raspberry Pi Pico 2
December 2025 - added Version 1.0 2HPico KiCad design files, BOM, Gerbers for main board and panel board and 3D printable panel.
Jan 28/2025 - added Version 1.0 2HPico DSP PCB design files and FR4 front panel design files and gerbers.
Feb 16/2026 - JLCPCB assembly files are now verifed. Minor BOM changes to 2HPico DSP as a result of further testing.
April 13/2026 - added 4HPico DSP PCB files. PCB fabbed, tested and working with 1 jumper.
Main components on the Pico 2HP
Pico 2HP bill of materials (BOM)
52 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74LVC1G3157 | SOT-23-6 | U1, U2 |
| 1 | AMS1117-5.0 | SOT-223-3_TabPin2 | U3 |
| 1 | LM4040DBZ-10 | SOT-23 | U4 |
| 1 | PT8211 DAC | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | TL074 | SOIC-14_3.9x8.7mm_P1.27mm | U6 |
| 1 | MCP6002 MCP6022 | SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 3 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J1, J2, J3 |
| 1 | CONN_01X05_PIN Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | 5k Zero Trim | Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 1 | RP2350 | RP2350-Waveshare | RZ1 |
| 2 | 1N5819WS | D_SOD-123 | D1, D2 |
| 2 | 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 1 | 22u | CP_Elec_5x5.9 | C3 |
| 6 | .1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C7, C12, C13, C14, C15 |
| 1 | 47U 47u | CP_Elec_5x5.9 | C6 |
| 2 | 470P 470p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C11 |
| 2 | 1000P 1000p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10 |
| 2 | 220P 220p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16, C17 |
| 1 | 100R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 2.2K 2.2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 2 | 47k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R8 |
| 2 | 180k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R9 |
| 4 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R11, R12, R13 |
| 2 | 24k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R15 |
| 2 | 3.3k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R17 |
| 2 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18, R19 |
| 2 | 18k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R21 |
Pico 2HP design files
The KiCad project lives in the rheslip/2HPico-Eurorack-Module-Hardware repository on GitHub; these links point at the commit this page was built from.
Pico 2HP: common questions
What microcontroller does the Pico 2HP use?
The Pico 2HP is built around the RP2350, from the RP2040/RP2350 family.
How big is the Pico 2HP PCB?
The Pico 2HP measures 70 × 30.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pico 2HP?
52 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pico 2HP design files?
From the rheslip/2HPico-Eurorack-Module-Hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pico 2HP design in my own project?
The repository has no license, so all rights stay with rheslip. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pico 2HP without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in 2HPico-Eurorack-Module-Hardware
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k