19 open source boards using the LM4040DBZ-10
Real designs built with the LM4040DBZ-10, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
4HPico
rheslip
20.3 × 110 mm71 parts2LNo license83RP2040/RP2350
MMM main
niektb
40 × 110 mm145 parts4LCC-BY-SA-4.034NXP
Fjol
hallmar
184.7 × 110.7 mm204 parts2LNo license21STM32
Cats eye
lennartquerter
90 × 110 mm223 parts4LCC-BY-NC-4.012TapeLooper MainBoard
TheSlowGrowth
119.6 × 106.5 mm243 parts2LCustom license10Daisy hardware v1
rafkhan
50.5 × 128.3 mm110 parts4LNo license9Seed3-DevKit-Eurorack
daisyaudio
141.9 × 128.5 mm130 parts2LNo license2AVR/Arduino
Multi vu eurorack
jjradler
41.3 × 109.5 mm130 parts2LCC0-1.01OAM Time Machine
patamari
74.9 × 152.4 mm94 parts2LNo license1Src multislope adc
Atmelfan
72.5 × 50 mm73 parts4LCERN-OHL-S-2.00RP2040/RP2350
4HPicoDSP
rheslip
20.3 × 110 mm71 parts2LNo license83Logiverter
nickajeglin
40.1 × 107.1 mm74 parts2LNo license208RP2040/RP2350
Pico 2HP Audio
rheslip
70 × 30.3 mm57 parts2LNo license83RP2040/RP2350
Toepler plus
niektb
20 × 106 mm112 parts2LCC-BY-SA-4.034Logiverter
VincentPeters
40.1 × 107.1 mm74 parts2LNo license9Daisy euro
sgreene30
67.3 × 108 mm134 parts4LNo license0RP2040/RP2350
Pico 2HP
rheslip
70 × 30.3 mm52 parts2LNo license83Andes
niektb
40 × 110 mm109 parts2LCC-BY-SA-4.034RP2040/RP2350
PI SCOPE
niektb
40 × 110 mm97 parts2LCC-BY-SA-4.034
How designs wire the LM4040DBZ-10
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the LM4040DBZ-10 connects to, and the resistors, capacitors and other passives placed on it.
- The K pin is tied to GND on 10 of 13 designs (10V on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Kpin 1 | Connected to: GND 77% · 10V 23% | — |
| NCpin 3 | Connected to: Not connected 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Logiverter by nickajeglin, 4HPico by rheslip, Andes by niektb and Fjol by hallmar.
The LM4040DBZ-10 in open source designs
The gallery holds 19 open source boards using the LM4040DBZ-10 from 13 GitHub repositories; a typical one measures about 50.5 × 110 mm and carries around 109 components.
74% are two-layer designs, the rest use four layers or more, and 32% carry an open source license.
The most starred is Logiverter by nickajeglin.
Parts used alongside the LM4040DBZ-10
Microcontrollers on boards using the LM4040DBZ-10
What boards using the LM4040DBZ-10 are built for
LM4040DBZ-10: common questions
Where can I find a LM4040DBZ-10 reference design?
Each of the 19 boards on this page is a real design using the LM4040DBZ-10. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LM4040DBZ-10 K pin connected?
The K pin is tied to GND on 10 of 13 designs (10V on 3). Counted from the KiCad layouts of 13 open source designs using the LM4040DBZ-10.
What parts are used alongside the LM4040DBZ-10?
The MCP6004, TL072, TL074, 4051 and AMS1117-5.0 appear in the most repositories here.
Which microcontrollers do boards using the LM4040DBZ-10 use?
Most are built on RP2040/RP2350 (7), AVR/Arduino (1), NXP (1) and STM32 (1).
How big is a typical board using the LM4040DBZ-10?
The median is 50.5 × 110 mm, and 74% are two-layer designs.
What is the most popular open source board using the LM4040DBZ-10?
By GitHub stars, Logiverter by nickajeglin, with 208 stars.
Can I simulate one of these boards using the LM4040DBZ-10 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.