Vga

rjw57·simplest-80s-computer·vga/hw/vga/vga.kicad_pcb

Vga PCB layout, top view — open source AVR/Arduino board by rjw57

About the Vga PCB

Vga is an open source AVR/Arduino PCB design by rjw57, published on GitHub. It is a 2-layer board measuring 99.1 × 99.1 mm, with 44 components from 22 distinct parts.

Its main chip is the ATmega328-PU, from the AVR/Arduino family. Other key parts include the 74HC74, 74HC00, 74HC04, CY7C199 and 74HC245. By type, the board carries 19 capacitors, 17 ICs, 3 connectors, 3 resistors, 1 crystal and 1 diode.

From the project

This is my rough scratch repo where I keep experiments to do with desiging 80s computer peripherals. It is not in any sensible shape to be used by others yet, apologies.

Main components on the Vga

Vga bill of materials (BOM)

44 components, 22 distinct parts.

QtyPartRefs
3
74HC74
U1, U5, U6
1
ATmega328-PU
U2
1
74HC00
U3
1
74HC04
U4
1
CY7C199
U7
1
74HC245
U8
1
74HC161
U9
4
74HC574
U10, U14, U15, U17
1
74HC166
U11
2
74HC590
U12, U13
1
74LS138
U16
1
DOTCLK
X1
1
ISP
J1
1
PWR
J2
1
BUS
J4
1
LED
D1
17
100n
C1, C2, C3, C4, C5, C6, C7, C8 +9
1
10µ
C18
1
100µ
C19
1
470R
R1
Show 2 more
QtyPartRefs
1
100R
R2
1
R_Network08
RN1

Vga design files

The KiCad project lives in the rjw57/simplest-80s-computer repository on GitHub; these links point at the commit this page was built from.

Vga: common questions

What microcontroller does the Vga use?

The Vga is built around the ATmega328-PU, from the AVR/Arduino family.

How big is the Vga PCB?

The Vga measures 99.1 × 99.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Vga?

44 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Vga design files?

From the rjw57/simplest-80s-computer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Vga design in my own project?

The repository has no license, so all rights stay with rjw57. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Vga without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in simplest-80s-computer

Similar boards