6 open source boards using the CY7C199
Real designs built with the CY7C199, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RC6502 General Video Adapter
tebl
99.1 × 99.7 mm80 parts2LGPL-3.0192HEC-Model-Z1
Andy18650
243.8 × 170.2 mm113 parts4LGPL-3.0366502 board
ulmer-a
100 × 100 mm48 parts2LGPL-3.04AVR/Arduino
Z80-computer
rjw57
99.1 × 99.1 mm45 parts2LNo license0AVR/Arduino
Vga
rjw57
99.1 × 99.1 mm44 parts2LNo license0Pal1vdp
dimitrit
73.7 × 81.1 mm38 parts2LNo license0
How designs wire the CY7C199
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the CY7C199 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 14 | Connected to: GND 83% · a signal 17% | — |
| VCCpin 28 | Connected to: 5V 83% · a signal 17% |
|
26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RC6502 General Video Adapter by tebl, HEC-Model-Z1 by Andy18650, 6502 board by ulmer-a and Pal1vdp by dimitrit.
The CY7C199 in open source designs
The gallery holds 6 open source boards using the CY7C199 from 6 GitHub repositories; a typical one measures about 99.1 × 99.4 mm and carries around 47 components.
83% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is RC6502 General Video Adapter by tebl.
Parts used alongside the CY7C199
Microcontrollers on boards using the CY7C199
What boards using the CY7C199 are built for
CY7C199: common questions
Where can I find a CY7C199 reference design?
Each of the 6 boards on this page is a real design using the CY7C199. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the CY7C199 VCC pin?
The VCC pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the CY7C199.
What parts are used alongside the CY7C199?
The 74LS00, 74LS04, 74LS30, 74HC04 and 74HC161 appear in the most repositories here.
Which microcontrollers do boards using the CY7C199 use?
Most are built on AVR/Arduino (2).
How big is a typical board using the CY7C199?
The median is 99.1 × 99.4 mm, and 83% are two-layer designs.
What is the most popular open source board using the CY7C199?
By GitHub stars, RC6502 General Video Adapter by tebl, with 192 stars.
Can I simulate one of these boards using the CY7C199 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.