43 open source boards using the 74HC161

Real designs built with the 74HC161, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

43 boardsClear filters|Most starred

How designs wire the 74HC161

Read from the KiCad layouts of 30 open source designs, one per repository: what each pin of the 74HC161 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 21 of 30 designs, most often 100 nF (then 1 µF).
  • The CEP pin is tied to 5V on 24 of 30 designs (a signal on 5).
  • The CET pin is tied to 5V on 21 of 30 designs (GND on 2, a signal on 6).
  • The TC pin is left unconnected on 21 of 30 designs (a signal on 9).
CEPpin 7Connected to: 5V 80% · a signal 17%
GNDpin 8Connected to: GND 100%
CETpin 10Connected to: 5V 70% · a signal 20%
TCpin 15Connected to: Not connected 70% · a signal 30%
VCCpin 16Connected to: 5V 100%
  • Decoupling capacitor on 70% · 100 nF (22), 1 µF (1)

11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Minimal-64x4-Home-Computer by slu4coder, 8-Bit CPU 32k by slu4coder, 65uino by AndersBNielsen and Minimal-64-Home-Computer by slu4coder.

The 74HC161 in open source designs

The gallery holds 43 open source boards using the 74HC161 from 34 GitHub repositories; a typical one measures about 101.6 × 99.1 mm and carries around 69 components.

79% are two-layer designs, the rest use four layers or more, and 49% carry an open source license.

The most starred is Minimal-64x4-Home-Computer by slu4coder.

Microcontrollers on boards using the 74HC161

74HC161: common questions

Where can I find a 74HC161 reference design?

Each of the 43 boards on this page is a real design using the 74HC161. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74HC161 VCC pin?

The VCC pin has a decoupling capacitor on 21 of 30 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 30 open source designs using the 74HC161.

How is the 74HC161 CEP pin connected?

The CEP pin is tied to 5V on 24 of 30 designs (a signal on 5). Counted from the KiCad layouts of 30 open source designs using the 74HC161.

How is the 74HC161 CET pin connected?

The CET pin is tied to 5V on 21 of 30 designs (GND on 2, a signal on 6). Counted from the KiCad layouts of 30 open source designs using the 74HC161.

What parts are used alongside the 74HC161?

The 74HC245, 74HC00, 74HC04, 74HC08 and 74HC32 appear in the most repositories here.

Which microcontrollers do boards using the 74HC161 use?

Most are built on AVR/Arduino (5) and STM32 (1).

How big is a typical board using the 74HC161?

The median is 101.6 × 99.1 mm, and 79% are two-layer designs.

What is the most popular open source board using the 74HC161?

By GitHub stars, Minimal-64x4-Home-Computer by slu4coder, with 323 stars.

Can I simulate one of these boards using the 74HC161 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part