BME690 Breakout Board

satomm1·Robot·Electrical/EnvironmentSensor/EnvironmentSensor.kicad_pcb

BME690 Breakout Board layout, top view — open source board by satomm1

About the BME690 Breakout Board

BME690 Breakout Board is an open source PCB design by satomm1, published on GitHub under the MIT license. It is a 2-layer board measuring 18.3 × 16.7 mm, with 4 components from 3 distinct parts.

Other key parts include the BME690. By type, the board carries 2 capacitors, 1 IC and 1 connector.

It belongs with the robotics & motion, sensors and dev boards & breakouts designs in this gallery.

From the project

Contains the electrical schematics and PCB gerber files for the Robot electronics. There are several Schematics/PCB designs for a variety of uses: - Main Board - the main motor controller and communicator with the Jetson - Microphone - a breakout board for a Mems omnidirectional

Contains the electrical schematics and PCB gerber files for the Robot electronics. There are several Schematics/PCB designs for a variety of uses: - Main Board - the main motor controller and communicator with the Jetson - Microphone - a breakout board for a Mems omnidirectional microphone - IMU Breakout - a breakout board containing a 6-axis IMU - Reflective Sensor - a breakout board containing a sensor for very short distance measurements

BME690 Breakout Board, from the project README — From the project README

Main components on the BME690 Breakout Board

BME690 Breakout Board bill of materials (BOM)

4 components, 3 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	BME690	BME690	IC1
1	PRPC006SBAN-M71RC Conn_01x06_Pin Sullins Connector Solutions	Molex_PicoBlade_53048-0610_1x06_P1.25mm_Horizontal	J1
2	CL21B104KBCNNNC 0.1uF Samsung Electro-Mechanics	C_0805_2012Metric_Pad1.18x1.45mm_HandSolder	C1, C2

BME690 Breakout Board design files

The KiCad project lives in the satomm1/Robot repository on GitHub; these links point at the commit this page was built from.

BME690 Breakout Board: common questions

How big is the BME690 Breakout Board?

The BME690 Breakout Board measures 18.3 × 16.7 mm, has 2 copper layers and is 1.64592 mm thick.

How many components are on the BME690 Breakout Board?

4 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the BME690 Breakout Board design files?

From the satomm1/Robot repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the BME690 Breakout Board design in my own project?

Yes, under the terms of its MIT license, which satomm1 chose for the repository.

More boards in Robot

Similar boards