HardLabs

Bussysteme und-Sensorik-ESP32-Projekt

SFMonsun·Bussysteme-und-Sensorik-ESP32-Projekt

Bussysteme und-Sensorik-ESP32-Projekt PCB layout, top view — open source ESP32 board by SFMonsun

About the Bussysteme und-Sensorik-ESP32-Projekt PCB

Bussysteme und-Sensorik-ESP32-Projekt is an open source ESP32 PCB design by SFMonsun, published on GitHub. It is a 4-layer board measuring 111.7 × 63.8 mm, with 32 components from 18 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N8R2, from the ESP32 family. Other key parts include the AMS1117, BMP390, INA219AxD, LM75B and SHTC3. By type, the board carries 10 capacitors, 10 resistors, 8 ICs, 2 diodes, 1 connector and 1 switch.

From the project

This will be the new repository for a University related Project using a custom ESP32 PCB.

"# Bussysteme-und-Sensorik-ESP32-Projekt"

Main components on the Bussysteme und-Sensorik-ESP32-Projekt

ESP32-S3-WROOM-1-N8R2AMS1117BMP390INA219AxDLM75BSHTC3CCS811

Bussysteme und-Sensorik-ESP32-Projekt bill of materials (BOM)

32 components, 18 distinct parts.

QtyPartRefs
1
ESP32-S3-WROOM-1-N8R2
U1
1
AMS1117
U2
1
BMP390
U3
1
INA219AxD
U4
1
LM75B
U5
1
SHTC3
U6
1
CCS811
U7
1
~
U8
1
USB_C_Plug_USB2.0
P1
1
EVQ-P2K02Q
SW1
2
LED
D1, D2
2
10uF
C1, C2
8
100nF
C3, C4, C5, C6, C7, C8, C9, C10
3
1M
R1, R4, R5
3
10k
R2, R3, R10
2
5.1k
R6, R7
1
4.7k
R8
1
R_Small
R9

Bussysteme und-Sensorik-ESP32-Projekt design files

The KiCad project lives in the SFMonsun/Bussysteme-und-Sensorik-ESP32-Projekt repository on GitHub; these links point at the commit this page was built from.

Bussysteme und-Sensorik-ESP32-Projekt: common questions

What microcontroller does the Bussysteme und-Sensorik-ESP32-Projekt use?

The Bussysteme und-Sensorik-ESP32-Projekt is built around the ESP32-S3-WROOM-1-N8R2, from the ESP32 family.

How big is the Bussysteme und-Sensorik-ESP32-Projekt PCB?

The Bussysteme und-Sensorik-ESP32-Projekt measures 111.7 × 63.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Bussysteme und-Sensorik-ESP32-Projekt?

32 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Bussysteme und-Sensorik-ESP32-Projekt design files?

From the SFMonsun/Bussysteme-und-Sensorik-ESP32-Projekt repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Bussysteme und-Sensorik-ESP32-Projekt design in my own project?

The repository has no license, so all rights stay with SFMonsun. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Bussysteme und-Sensorik-ESP32-Projekt without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards