MOTOR-BOARD

Shaurya-Ashu·MOTOR-BOARD·PCB/moto board.kicad_pcb

MOTOR-BOARD layout, top view — open source ESP32 board by Shaurya-Ashu

About the MOTOR-BOARD

MOTOR-BOARD is an open source ESP32 PCB design by Shaurya-Ashu, published on GitHub under the MIT license. It is a 4-layer board measuring 102 × 73.4 mm, with 95 components from 30 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the ST1S41PHR, AMS1117-3.3, USBLC6-2SC6, TPS2116DRLR and TB6612FNG. By type, the board carries 32 capacitors, 18 resistors, 14 connectors, 9 ICs, 4 modules and 4 switches.

It belongs with the robotics & motion, power & battery and dev boards & breakouts designs in this gallery.

From the project

I have used a USB-C port for programming and powering Electronics and the dedicated 3S input for powering the motors.

I have used a USB-C port for programming and powering Electronics and the dedicated 3S input for powering the motors.

I have used a INPUT VOLTAGE MULTIPLEXER for selecting between the USB-C power source and battery power source to power the electronics , its is set default to USB power and if USB power is unavailable, then it uses the battery power source. I get to know about this in a Instagram reel where someone was building custom ESC.

MOTOR-BOARD, from the project README
From the project README

Main components on the MOTOR-BOARD

MOTOR-BOARD bill of materials (BOM)

95 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
ST1S41PHR
IC1, IC2
1
ESP32-S3-WROOM-1
U1
2
AMS1117-3.3
U2, U3
1
USBLC6-2SC6
U4
1
TPS2116DRLR
U5
2
TB6612FNG
U6, U7
4
Pololu_Breakout_A4988
A1, A2, A3, A4
1
2340901-1
J1
1
Conn_01x08_Socket
J6
12
Conn_01x02_Pin
J19, J20, J21, J22, J23, J24, J25, J26 +4
1
Conn_01x04_Pin
I2C
2
Conn_01x04_Pin
S1, S2
2
OS103011MS8QP1
S3, S4
8
Conn_01x03_Pin
SR1, SR2, SR3, SR4, SR5, SR6, SR7, SR8
2
LED
D1, D2
1
SMBJ30CA-13-F
D3
2
XAL5030-332MEC
L1, L2
5
22uf
C1, C5, C6, C7, C8
6
1uf
C2, C9, C10, C11, C23, C25
6
0.1uf
C3, C4, C12, C14, C17, C18
Show 10 more
QtyPartRefs
8
10uf
C13, C15, C16, C19, C21, C22, C26, C27
1
10UF
C20
2
47uf
C24, C28
4
100uf
C29, C30, C31, C32
3
10k
R1, R13, R16
2
0
R2, R3
7
1K
R4, R5, R10, R11, R12, R17, R18
2
5K1
R6, R7
2
47
R8, R9
2
68k
R14, R15

MOTOR-BOARD design files

The KiCad project lives in the Shaurya-Ashu/MOTOR-BOARD repository on GitHub; these links point at the commit this page was built from.

MOTOR-BOARD: common questions

What microcontroller does the MOTOR-BOARD use?

The MOTOR-BOARD is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the MOTOR-BOARD?

The MOTOR-BOARD measures 102 × 73.4 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the MOTOR-BOARD?

95 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MOTOR-BOARD design files?

From the Shaurya-Ashu/MOTOR-BOARD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MOTOR-BOARD design in my own project?

Yes, under the terms of its MIT license, which Shaurya-Ashu chose for the repository.

Can I test firmware for the MOTOR-BOARD without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards