Udemy-Course

shreyashswarnkar210205·Udemy-Course-PCB·main/main.kicad_pcb

Udemy-Course PCB layout, top view — open source ESP32 board by shreyashswarnkar210205

About the Udemy-Course PCB

Udemy-Course is an open source ESP32 PCB design by shreyashswarnkar210205, published on GitHub. It is a 4-layer board measuring 96.2 × 58 mm, with 80 components from 40 distinct parts.

Its main chip is the ESP32-C3-WROOM-02-H4, from the ESP32 family. Other key parts include the MCP73871-2CCI_ML, BME280, CP2102N-Axx-xQFN20, USBLC6-2SC6 and W25Q32JVSSIQ. By type, the board carries 32 resistors, 22 capacitors, 7 ICs, 6 diodes, 5 connectors and 3 transistors.

It belongs with the iot & wireless, usb & debug tools and audio designs in this gallery.

From the project

A 4-layer custom PCB built around the ESP32-C3-WROOM-02 module, designed for embedded IoT applications with USB, Li-ion charging, audio input, external flash, and sensor integration.

A 4-layer custom PCB built around the ESP32-C3-WROOM-02 module, designed for embedded IoT applications with USB, Li-ion charging, audio input, external flash, and sensor integration.

This project demonstrates full-cycle PCB design including schematic capture, custom symbol & footprint creation, 4-layer routing, DFM validation, and Gerber generation.

- ESP32-C3-WROOM-02-H4 (Wi-Fi + BLE) - CP2102N USB-to-UART bridge - MCP73871 Li-ion battery charging & power management - LM1117-3.3V voltage regulation - W25Q32 external SPI flash - MAX4466 microphone amplifier - TEMT6000 ambient light sensor -…

Udemy-Course, from the project README
From the project README

Main components on the Udemy-Course

Udemy-Course bill of materials (BOM)

80 components, 40 distinct parts.

QtyPartRefs
1
MCP73871-2CCI_ML
U1
1
BME280
U2
1
ESP32-C3-WROOM-02-H4
U3
1
CP2102N-Axx-xQFN20
U4
1
USBLC6-2SC6
U5
1
W25Q32JVSSIQ
U6
1
MAX4466EXK
U7
1
TEMT6000X01
Q1
2
BC817
Q2, Q3
1
SS-52400-003
J1
1
B2B-PH-SM4-TB
J2
1
GSD090012SEU
J3
1
Conn_01x04_Pin
J4
1
Conn_01x05_Pin
J5
1
0ZCH0110AF2E
F1
1
CMC-5042PF-AC
MK1
1
Boot
S1
1
Reset
S2
1
LM1117MPX-3.3
VR1
2
RED
D1, D4
Show 20 more
QtyPartRefs
2
GREEN
D2, D5
2
BLUE
D3, D6
12
0.1u
C1, C2, C5, C8, C10, C13, C14, C15 +4
3
10u
C3, C4, C12
4
1u
C6, C11, C19, C22
1
10u
C7
1
4.7u
C9
1
10n
C17
8
10k
R1, R2, R19, R23, R30, R32, R33, R34
2
5k1
R3, R4
3
2k
R5, R26, R28
1
20k
R6
6
470
R7, R8, R9, R10, R14, R18
1
1k
R11
1
22k1
R12
1
47k5
R13
4
50
R15, R16, R20, R22
2
4k7
R24, R25
2
1M
R27, R29
1
100k
R31

Udemy-Course design files

The KiCad project lives in the shreyashswarnkar210205/Udemy-Course-PCB repository on GitHub; these links point at the commit this page was built from.

Udemy-Course: common questions

What microcontroller does the Udemy-Course use?

The Udemy-Course is built around the ESP32-C3-WROOM-02-H4, from the ESP32 family.

How big is the Udemy-Course PCB?

The Udemy-Course measures 96.2 × 58 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Udemy-Course?

80 components, from 40 distinct parts. The full bill of materials is listed on this page.

Where can I download the Udemy-Course design files?

From the shreyashswarnkar210205/Udemy-Course-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Udemy-Course design in my own project?

The repository has no license, so all rights stay with shreyashswarnkar210205. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Udemy-Course without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards