4in gps

sonicavionics·4in-gps·kicad/gps.kicad_pcb

4in gps PCB layout, top view — open source RP2040/RP2350 board by sonicavionics

About the 4in gps PCB

4in gps is an open source RP2040/RP2350 PCB design by sonicavionics, published on GitHub under the MIT license. It is a 4-layer board measuring 84.1 × 61.7 mm, with 84 components from 42 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the SN74LVC2G17DCKR, W25Q128JVP, MCP25625T-E/ML, NEO-M9N and NC7WZ07P6X. By type, the board carries 27 capacitors, 21 resistors, 10 ICs, 9 connectors, 6 diodes and 2 crystals.

It belongs with the rf & radio designs in this gallery.

From the project

GPS Module

4in gps, from the project README
From the project README

Main components on the 4in gps

4in gps bill of materials (BOM)

84 components, 42 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
SN74LVC2G17DCKR
Texas Instruments
U1, U10
1
W25Q128JVP
U2
1
MCP25625T-E/ML
U3
1
RP2040
U4
1
NEO-M9N
U5
1
NC7WZ07P6X
onsemi
U6
1
RT9013-33GB
Richtek Tech
U7
1
TPS2115APWR
U8
1
SI1016X-T1-GE3
U9
1
ABM8-272-T3
X1
1
X322516MLB4SI
Y1
1
Bus_PCI_Express_x1
J1
2
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J2, J4
5
Conn_01x03
J3, J6, J7, J8, J9
1
Conn_01x02_Pin
J5
4
JUMPER-SMT_2_NC_TRACE_SILK
PPS_LED1, PWR1, PWR2, STAT_LED1
1
BWSMA-KWE-Z001
RF1
1
TS-1187A-B-A-B
S2
1
JUMPER-SMT_2_NC_TRACE_SILK
VCC_RF1
1
—
ballsack1
Show 22 more
QtyPartRefs
1
PESD9R3.3ST5G
D1
1
PMEGA4005EJ,115
0.5A/40V/420mV
D2
1
XL-1608UWC-04
LED
D3
1
LED
D4
1
KT-0603B
LED
D5
1
KT-0603R
LED
D6
1
LQG15HS27NJ02D
27n >300mA
L1
17
100N
100n
C1, C2, C5, C6, C8, C9, C11, C13 +9
2
15P
15p
C3, C4
5
1u
C7, C10, C12, C24, C25
2
22P
22p
C16, C19
1
FC0V474ZFTBR24
C23
4
5.1K
5.1k
R1, R2, R11, R12
4
27
R3, R4, R16, R17
1
0402WGF100JTCE
10R
R5
2
10K
10k
R6, R15
1
0402WGF2700TCE
270R
R7
4
1k
R8, R14, R20, R22
1
0805W8F750JT5E
75R
R9
2
0402WGF1003TCE
100k
R10, R30
1
0402WGF4990TCE
499R
R13
1
0402WGF2401TCE
2.4k
R18

4in gps design files

The KiCad project lives in the sonicavionics/4in-gps repository on GitHub; these links point at the commit this page was built from.

4in gps: common questions

What microcontroller does the 4in gps use?

The 4in gps is built around the RP2040, from the RP2040/RP2350 family.

How big is the 4in gps PCB?

The 4in gps measures 84.1 × 61.7 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the 4in gps?

84 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 4in gps design files?

From the sonicavionics/4in-gps repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the 4in gps design in my own project?

Yes, under the terms of its MIT license, which sonicavionics chose for the repository.

Can I test firmware for the 4in gps without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards