SparkFun IoT Node LoRaWAN
sparkfun·SparkFun_IoT_Node_LoRaWAN·Hardware/SparkFun_IoT_Node_LoRaWAN.kicad_pcb
About the SparkFun IoT Node LoRaWAN PCB
SparkFun IoT Node LoRaWAN is an open source RP2040/RP2350 PCB design by sparkfun, published on GitHub. It is a 4-layer board measuring 59 × 79.5 mm, with 113 components from 49 distinct parts.
Its main chip is the RP2350A, from the RP2040/RP2350 family. Other key parts include the W25Q128JVPIM, APS6404L-3SQR-ZR, XBLR, CH340C and LM66200. By type, the board carries 31 capacitors, 28 resistors, 11 connectors, 10 test points, 9 ICs and 7 jumpers.
It belongs with the dev boards & breakouts, rf & radio and iot & wireless designs in this gallery.
From the project
Hardware Repository for the SparkFun IoT Node - LoRaWAN Development board
SparkFun IoT Node - LoRaWAN ========================================
The SparkFun IoT Node – LoRaWAN development board brings an entirely new level of usability to the often convoluted and configuration-intensive effort to set up a LoRaWAN™-based IoT Device. Combining the ease of LoRaWAN™ setup and configuration delivered by the Digi X-ON™ system with the rapid prototyping provided by the SparkFun Qwiic ecosystem, the SparkFun IoT Node – LoRaWAN development board accelerates IoT end-node creation and deployment.

Main components on the SparkFun IoT Node LoRaWAN
SparkFun IoT Node LoRaWAN bill of materials (BOM)
113 components, 49 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2350A | QFN-60-1EP_7x7mm_P0.4mm_EP3.5x3.5mm | U1 |
| 1 | W25Q128JVPIM | WDFN-8_6x5mm-SkinnyCenterPad | U2 |
| 1 | APS6404L-3SQR-ZR | USON-8_3x2mm-SkinnyCenterPad | U3 |
| 1 | XBLR | XBee_LR | U4 |
| 1 | CH340C | SO-16 | U5 |
| 1 | LM66200 | SOT-583-8 | U6 |
| 1 | RT9080-3.3 | SOT23-5 | U7 |
| 1 | MCP73831 | SOT23-5 | U8 |
| 1 | MAX17048 | DFN-8 | U9 |
| 1 | DMG2305UX | SOT23-3 | Q1 |
| 1 | 12MHz | Crystal_SMD_2.5x2.0mm | Y1 |
| 2 | USB_C_Receptacle | USB-C_16 | J1, J3 |
| 1 | Conn_01x03 | 1x03 | J2 |
| 1 | SWD | 2x05_P1.27mm_SMD_Unshrouded | J4 |
| 4 | Conn_01x10 | 1x12 | J5, J6, J7, J8 |
| 1 | JST_2mm_LiPo | JST_SMD_2.0mm-2 | J9 |
| 1 | microSD_Friction | microSD_Friction_Fit_Common | J10 |
| 1 | Qwiic_RA | JST_SMD_1.0mm-4_RA | J11 |
| 1 | SHLD | Jumper_2_NC_Trace | JP1 |
| 1 | XB_MEAS | Jumper_2_PTH_SMD_Combo-NC | JP2 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XB_SHLD | Jumper_2_NC_Trace | JP3 |
| 1 | LP | Jumper_2_NC_Trace | JP4 |
| 1 | CHG | Jumper_2_NC_Trace | JP5 |
| 1 | PWR | Jumper_2_NC_Trace | JP6 |
| 1 | I2C | Jumper_3_NC-2_Trace | JP7 |
| 4 | Standoff | Standoff | ST1, ST2, ST3, ST4 |
| 1 | DPDT_Slide_SMD_7.2x3.5mm | Slide_DPDT_SMD_7.2x3.5mm | SW1 |
| 3 | SMD_4.6x2.8mm_h2.5mm | Push_SMD_4.6x2.8mm_h2.5mm | SW2, SW3, SW4 |
| 10 | 1.0mm | TestPoint-1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +2 |
| 2 | DT1042-04SO | SOT23-6 | D1, D3 |
| 1 | BAT20J | SOD-323 | D2 |
| 1 | WS2812B_CBI | WS2812_2020 | D4 |
| 1 | Red | LED_0603_1608Metric_Red | D5 |
| 1 | Yellow | LED_0603_1608Metric_Yellow | D6 |
| 1 | 4.7uH | 1008_2520Metric | L1 |
| 17 | 0.1uF | C_0603_1608Metric | C1, C3, C6, C7, C8, C9, C10, C11 +9 |
| 2 | 15pF | C_0603_1608Metric | C2, C5 |
| 5 | 2.2uF | C_0603_1608Metric | C4, C24, C25, C28, C29 |
| 4 | 10uF | C_0603_1608Metric | C14, C15, C20, C26 |
| 2 | 1.0uF | C_0603_1608Metric | C16, C22 |
| 1 | 10pF | C_0603_1608Metric | C23 |
| 1 | 10 | R_0603_1608Metric | R1 |
| 2 | 1k | R_0603_1608Metric | R2, R7 |
| 5 | 5.1k | R_0603_1608Metric | R3, R4, R11, R12, R13 |
| 2 | 27 | R_0603_1608Metric | R5, R6 |
| 10 | 10k | R_0603_1608Metric | R8, R9, R10, R14, R18, R22, R23, R24 +2 |
| 3 | 100k | R_0603_1608Metric | R15, R16, R17 |
| 2 | 4.7k | R_0603_1608Metric | R19, R20 |
| 3 | 2.2k | R_0603_1608Metric | R21, R26, R27 |
SparkFun IoT Node LoRaWAN design files
The KiCad project lives in the sparkfun/SparkFun_IoT_Node_LoRaWAN repository on GitHub; these links point at the commit this page was built from.
SparkFun IoT Node LoRaWAN: common questions
What microcontroller does the SparkFun IoT Node LoRaWAN use?
The SparkFun IoT Node LoRaWAN is built around the RP2350A, from the RP2040/RP2350 family.
How big is the SparkFun IoT Node LoRaWAN PCB?
The SparkFun IoT Node LoRaWAN measures 59 × 79.5 mm, has 4 copper layers and is 1.6458 mm thick.
How many components are on the SparkFun IoT Node LoRaWAN?
113 components, from 49 distinct parts. The full bill of materials is listed on this page.
Where can I download the SparkFun IoT Node LoRaWAN design files?
From the sparkfun/SparkFun_IoT_Node_LoRaWAN repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SparkFun IoT Node LoRaWAN design in my own project?
The repository has no license, so all rights stay with sparkfun. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SparkFun IoT Node LoRaWAN without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in SparkFun_IoT_Node_LoRaWAN
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k