Sd2snes xenocrisis
sttng·sd2snes-xenocrisis·pcb/kicad/RevF/sd2snes.kicad_pcb
About the Sd2snes xenocrisis PCB
Sd2snes xenocrisis is an open source FPGA PCB design by sttng, published on GitHub under the GPL-2.0 license. It is a board measuring 101.5 × 83 mm, with 147 components from 48 distinct parts.
Its main chip is the XC3S400-PQ208, from the FPGA family. Other key parts include the 74ALVC164245DGG, MIC23250-S4YMT, MCP1824-1802E/OT, MCP1824-2502E/OT and PIC12F629-I/P. By type, the board carries 78 capacitors, 24 resistors, 12 ICs, 8 connectors, 4 inductors and 3 transistors.
From the project
This is a sd2snes fork to support Xeno Crisis (SNES). Xeno Crisis is an aftermarket cart with a RP2040 chip that runs most relevent parts of its software.
SD card based multi-purpose cartridge for the SNES
See FURiOUS's README for information on Save States!
Main components on the Sd2snes xenocrisis
Sd2snes xenocrisis bill of materials (BOM)
147 components, 48 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 74ALVC164245DGG | TSSOP48 | U101, U102, U103 |
| 1 | XC3S400-PQ208 | PQFP208 | U201 |
| 1 | MIC23250-S4YMT | QFN10-2x2_LONGPADS | U301 |
| 1 | MCP1824-1802E/OT | SOT23-5_LARGEPADS | U311 |
| 1 | MCP1824-2502E/OT | SOT23-5_LARGEPADS | U321 |
| 1 | PIC12F629-I/P | DIP-8__300 | U331 |
| 1 | CS4344 | TSSOP10 | U341 |
| 1 | LPC1754 | LQFP80-.5 | U401 |
| 1 | MT45W8MW16 | VFBGA54 | U501 |
| 1 | CY62148EV30-ZSXI | TSOPII-32 | U511 |
| 2 | 2N2222A | SOT23EBC | Q101, Q511 |
| 1 | IRLML6402PbF | SOT23GDS | Q301 |
| 1 | 12MHz | HC49US | X401 |
| 1 | 32.768kHz | XTAL_SMD_05019 | X402 |
| 1 | SNESCART_EXT | SNESCART_EXT2_SMTUSB | J101 |
| 1 | Hirose DM1AA | HRS-DM1AA | J411 |
| 1 | USB Mini-B SMT | USB_MINIB_SMT | J421 |
| 1 | CONN_1 | PAD_1x1mm | P113 |
| 1 | CONN_7X2 | pin_array_7x2 | P401 |
| 2 | CONN_2 | PIN_ARRAY_2X1 | P402, P403 |
Show 28 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_3X2 | pin_array_3x2 | P404 |
| 1 | Keystone 1059 / KZH20PCB | BT_KEYSTONE_1059_20MM | BT351 |
| 12 | 100 | R_PACK_1206_2 | RA101, RA102, RA105, RA106, RA107, RA108, RA109, RA110 +4 |
| 2 | FB | R_PACK_1206_2 | RA103, RA104 |
| 1 | BAT54C | SOT23EBC | D511 |
| 1 | FILTER | SM0805_FIXEDMASK | FB341 |
| 2 | 1uH | SM1210L_NEW | L301, L302 |
| 1 | 10uH | SM1210L_NEW | L391 |
| 47 | 100n | SM0805_FIXEDMASK | C101, C102, C103, C104, C105, C106, C111, C112 +39 |
| 10 | 10p | SM0805_FIXEDMASK | C121, C122, C123, C124, C125, C126, C127, C128 +2 |
| 7 | 4.7u | SM0805_FIXEDMASK | C301, C303, C304, C311, C312, C321, C322 |
| 3 | 10n | SM0805_FIXEDMASK | C302, C347, C349 |
| 2 | 100p | SM0805_FIXEDMASK | C332, C333 |
| 1 | 1u | SM0805_FIXEDMASK | C342 |
| 3 | 10u | SM0805_FIXEDMASK | C344, C345, C411 |
| 2 | 3.3u | SM0805_FIXEDMASK | C346, C348 |
| 1 | 100u | SM1206_NEW | C391 |
| 2 | 33p | SM0805_FIXEDMASK | C406, C407 |
| 1 | 270 | SM0805_FIXEDMASK | R101 |
| 2 | 100k | SM0805_FIXEDMASK | R102, R513 |
| 2 | 4k7 | SM0805_FIXEDMASK | R103, R512 |
| 2 | 20k | SM0805_FIXEDMASK | R301, R511 |
| 6 | 680 | SM0805_FIXEDMASK | R331, R332, R333, R401, R402, R403 |
| 2 | 470 | SM0805_FIXEDMASK | R341, R343 |
| 4 | 10k | SM0805_FIXEDMASK | R342, R344, R404, R407 |
| 2 | 100 | SM0805_FIXEDMASK | R405, R406 |
| 2 | 33 | SM0805_FIXEDMASK | R421, R422 |
| 1 | 1.5k | SM0805_FIXEDMASK | R423 |
Sd2snes xenocrisis design files
The KiCad project lives in the sttng/sd2snes-xenocrisis repository on GitHub; these links point at the commit this page was built from.
Sd2snes xenocrisis: common questions
What microcontroller does the Sd2snes xenocrisis use?
The Sd2snes xenocrisis is built around the XC3S400-PQ208, from the FPGA family.
How big is the Sd2snes xenocrisis PCB?
The Sd2snes xenocrisis measures 101.5 × 83 mm and is 1.6002 mm thick.
How many components are on the Sd2snes xenocrisis?
147 components, from 48 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sd2snes xenocrisis design files?
From the sttng/sd2snes-xenocrisis repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Sd2snes xenocrisis design in my own project?
Yes, under the terms of its GPL-2.0 license, which sttng chose for the repository.
Can I test firmware for the Sd2snes xenocrisis without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765