5 open source boards using the LPC1754

Real designs built with the LPC1754, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the LPC1754

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LPC1754 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 10 has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
  • Pin 13 has a crystal on 5 of 5 designs, most often 32.768 kHz.
  • Pin 13 has a capacitor to GND on 5 of 5 designs, most often 10 pF.
  • Pin 14 has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ.
Pin 8Connected to: 3.3V 100%
Pin 9Connected to: GND 100%
Pin 10Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (5)
Pin 11Connected to: Not connected 100%
Pin 12Connected to: GND 100%
Pin 13Connected to: Signal 100%
  • Crystal on 100% · 32.768 kHz (5)
  • Capacitor to GND on 100% · 10 pF (5)
Pin 14Connected to: A connector 100%
  • Pull-up to 3.3V on 100% · 10 kΩ (5)
  • Capacitor to GND on 100% · 100 nF (5)
Pin 15Connected to: Signal 100%
  • Crystal on 100% · 32.768 kHz (5)
  • Capacitor to GND on 100% · 10 pF (5)
Pin 16Connected to: BATT 100%
Pin 17Connected to: Not connected 100%
Pin 19Connected to: Signal 100%
  • Crystal on 100% · 12 MHz (5)
  • Capacitor to GND on 100% · 33 pF (5)
Pin 20Connected to: Signal 100%
  • Crystal on 100% · 12 MHz (5)
  • Capacitor to GND on 100% · 33 pF (5)
Pin 21Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (5)
Pin 22Connected to: Signal 100%
  • Series resistor on 100% · 33 Ω (5)
Pin 23Connected to: Signal 100%
  • Series resistor on 100% · 33 Ω (5)
Pin 24Connected to: GND 100%
Pin 26Connected to: Not connected 100%
Pin 27Connected to: Not connected 100%
Pin 28Connected to: Not connected 100%
Pin 29Connected to: Signal 100%
  • Series resistor on 100% · 680 Ω (5)
Pin 33Connected to: GND 100%
Pin 34Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (5)
Pin 35Connected to: Not connected 100%
Pin 37Connected to: The microcontroller 100%
  • Capacitor to GND on 100% · 100 pF (5)
  • Series resistor on 100% · 680 Ω (5)
Pin 38Connected to: The microcontroller 100%
  • Capacitor to GND on 100% · 100 pF (5)
  • Series resistor on 100% · 680 Ω (5)
Pin 40Connected to: Signal 100%
  • Series resistor on 100% · 100 Ω (5)
Pin 41Connected to: A connector 100%
  • Pull-up to 3.3V on 100% · 10 kΩ (5)
Pin 42Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (5)
Pin 43Connected to: GND 100%
Pin 51Connected to: Not connected 100%
Pin 52Connected to: Not connected 100%
Pin 53Connected to: Signal 100%
  • Series resistor on 100% · 680 Ω (5)
Pin 54Connected to: Signal 100%
  • Series resistor on 100% · 680 Ω (5)
Pin 56Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (5)
Pin 57Connected to: GND 100%
Pin 65Connected to: Signal 100%
  • Series resistor on 100% · 1.5 kΩ (5)
Pin 66Connected to: GND 100%
Pin 67Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (5)
Pin 68Connected to: Not connected 100%
Pin 69Connected to: Signal 100%
  • Series resistor on 100% · 100 Ω (5)

40 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sd2snes by mrehkopf, Sd2snes by magnotrans, Sd2snes by dfederspiel and Sd2snes xenocrisis by sttng.

The LPC1754 in open source designs

The gallery holds 5 open source boards using the LPC1754 from 5 GitHub repositories; a typical one measures about 101.5 × 83 mm and carries around 147 components.

100% carry an open source license.

The most starred is Sd2snes by mrehkopf.

Microcontrollers on boards using the LPC1754

What boards using the LPC1754 are built for

LPC1754: common questions

Where can I find a LPC1754 reference design?

Each of the 5 boards on this page is a real design using the LPC1754. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LPC1754 pin 10?

Pin 10 has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the LPC1754.

How is the LPC1754 pin 13 connected?

Pin 13 has a crystal on 5 of 5 designs, most often 32.768 kHz. Counted from the KiCad layouts of 5 open source designs using the LPC1754.

What pull-up resistor is used on the LPC1754 pin 14?

Pin 14 has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the LPC1754.

What parts are used alongside the LPC1754?

The 74ALVC164245DGG, CS4344, CY62148EV30-ZSXI, MCP1824-1802E/OT and MCP1824-2502E/OT appear in the most repositories here.

Which microcontrollers do boards using the LPC1754 use?

Most are built on FPGA (5).

How big is a typical board using the LPC1754?

The median is 101.5 × 83 mm.

What is the most popular open source board using the LPC1754?

By GitHub stars, Sd2snes by mrehkopf, with 717 stars.

Can I simulate one of these boards using the LPC1754 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part