5 open source boards using the MT45W8MW16
Real designs built with the MT45W8MW16, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Sd2snes
mrehkopf
101.5 × 83 mm147 partsGPL-2.0717FPGA
Sd2snes
magnotrans
101.5 × 83 mm147 partsGPL-2.04FPGA
Sd2snes
dfederspiel
101.5 × 83 mm147 partsGPL-2.02FPGA
Sd2snes xenocrisis
sttng
101.5 × 83 mm147 partsGPL-2.01FPGA
Sd2snes-1
emtee40
101.5 × 83 mm147 partsGPL-2.00
How designs wire the MT45W8MW16
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MT45W8MW16 connects to, and the resistors, capacitors and other passives placed on it.
- Pin D6 has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
- Pin E1 has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
- Pin A6 is tied to GND on 5 of 5 designs.
- Pin D1 is tied to GND on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin A6 | Connected to: GND 100% | — |
| Pin D1 | Connected to: GND 100% | — |
| Pin D6 | Connected to: 1.8V 100% |
|
| Pin E1 | Connected to: 3.3V 100% |
|
| Pin E6 | Connected to: GND 100% | — |
| Pin J1 | Connected to: Not connected 100% | — |
| Pin J2 | Connected to: GND 100% | — |
| Pin J3 | Connected to: GND 100% | — |
| Pin J5 | Connected to: Not connected 100% | — |
| Pin J6 | Connected to: Not connected 100% | — |
44 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sd2snes by mrehkopf, Sd2snes by magnotrans, Sd2snes by dfederspiel and Sd2snes xenocrisis by sttng.
The MT45W8MW16 in open source designs
The gallery holds 5 open source boards using the MT45W8MW16 from 5 GitHub repositories; a typical one measures about 101.5 × 83 mm and carries around 147 components.
100% carry an open source license.
The most starred is Sd2snes by mrehkopf.
Parts used alongside the MT45W8MW16
Microcontrollers on boards using the MT45W8MW16
What boards using the MT45W8MW16 are built for
MT45W8MW16: common questions
Where can I find a MT45W8MW16 reference design?
Each of the 5 boards on this page is a real design using the MT45W8MW16. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MT45W8MW16 pin D6?
Pin D6 has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the MT45W8MW16.
What decoupling capacitors do designs use on the MT45W8MW16 pin E1?
Pin E1 has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the MT45W8MW16.
How is the MT45W8MW16 pin A6 connected?
Pin A6 is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MT45W8MW16.
What parts are used alongside the MT45W8MW16?
The 74ALVC164245DGG, CS4344, CY62148EV30-ZSXI, LPC1754 and MCP1824-1802E/OT appear in the most repositories here.
Which microcontrollers do boards using the MT45W8MW16 use?
Most are built on FPGA (5).
How big is a typical board using the MT45W8MW16?
The median is 101.5 × 83 mm.
What is the most popular open source board using the MT45W8MW16?
By GitHub stars, Sd2snes by mrehkopf, with 717 stars.
Can I simulate one of these boards using the MT45W8MW16 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.