5 open source boards using the XC3S400-PQ208
Real designs built with the XC3S400-PQ208, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Sd2snes
mrehkopf
101.5 × 83 mm147 partsGPL-2.0717FPGA
Sd2snes
magnotrans
101.5 × 83 mm147 partsGPL-2.04FPGA
Sd2snes
dfederspiel
101.5 × 83 mm147 partsGPL-2.02FPGA
Sd2snes xenocrisis
sttng
101.5 × 83 mm147 partsGPL-2.01FPGA
Sd2snes-1
emtee40
101.5 × 83 mm147 partsGPL-2.00
How designs wire the XC3S400-PQ208
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the XC3S400-PQ208 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 6 has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
- Pin 17 has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
- Pin 49 has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
- Pin 69 has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: GND 100% | — |
| Pin 6 | Connected to: 3.3V 100% |
|
| Pin 8 | Connected to: GND 100% | — |
| Pin 14 | Connected to: GND 100% | — |
| Pin 17 | Connected to: 2.5V 100% |
|
| Pin 23 | Connected to: 3.3V 100% | — |
| Pin 25 | Connected to: GND 100% | — |
| Pin 30 | Connected to: GND 100% | — |
| Pin 32 | Connected to: 3.3V 100% | — |
| Pin 38 | Connected to: 2.5V 100% | — |
| Pin 41 | Connected to: GND 100% | — |
| Pin 47 | Connected to: GND 100% | — |
| Pin 49 | Connected to: 3.3V 100% |
|
| Pin 53 | Connected to: GND 100% | — |
| Pin 54 | Connected to: Not connected 100% | — |
| Pin 55 | Connected to: Not connected 100% | — |
| Pin 56 | Connected to: Not connected 100% | — |
| Pin 59 | Connected to: GND 100% | — |
| Pin 60 | Connected to: 3.3V 100% | — |
| Pin 66 | Connected to: GND 100% | — |
| Pin 69 | Connected to: 2.5V 100% |
|
| Pin 70 | Connected to: 1.2V 100% |
|
| Pin 73 | Connected to: 3.3V 100% |
|
| Pin 75 | Connected to: GND 100% | — |
| Pin 82 | Connected to: GND 100% | — |
| Pin 84 | Connected to: 3.3V 100% |
|
| Pin 88 | Connected to: 1.2V 100% |
|
| Pin 89 | Connected to: 2.5V 100% |
|
| Pin 91 | Connected to: GND 100% | — |
| Pin 98 | Connected to: 3.3V 100% |
|
| Pin 99 | Connected to: GND 100% | — |
| Pin 104 | Connected to: Signal 100% |
|
| Pin 105 | Connected to: GND 100% | — |
| Pin 110 | Connected to: 3.3V 100% |
|
| Pin 112 | Connected to: GND 100% | — |
| Pin 114 | Connected to: Signal 100% |
|
| Pin 118 | Connected to: GND 100% | — |
| Pin 121 | Connected to: 2.5V 100% | — |
| Pin 127 | Connected to: 3.3V 100% |
|
| Pin 129 | Connected to: GND 100% | — |
120 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sd2snes by mrehkopf, Sd2snes by magnotrans, Sd2snes by dfederspiel and Sd2snes xenocrisis by sttng.
The XC3S400-PQ208 in open source designs
The gallery holds 5 open source boards using the XC3S400-PQ208 from 5 GitHub repositories; a typical one measures about 101.5 × 83 mm and carries around 147 components.
100% carry an open source license.
The most starred is Sd2snes by mrehkopf.
Parts used alongside the XC3S400-PQ208
Microcontrollers on boards using the XC3S400-PQ208
What boards using the XC3S400-PQ208 are built for
XC3S400-PQ208: common questions
Where can I find a XC3S400-PQ208 reference design?
Each of the 5 boards on this page is a real design using the XC3S400-PQ208. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the XC3S400-PQ208 pin 6?
Pin 6 has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the XC3S400-PQ208.
What decoupling capacitors do designs use on the XC3S400-PQ208 pin 17?
Pin 17 has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the XC3S400-PQ208.
What decoupling capacitors do designs use on the XC3S400-PQ208 pin 49?
Pin 49 has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the XC3S400-PQ208.
What parts are used alongside the XC3S400-PQ208?
The 74ALVC164245DGG, CS4344, CY62148EV30-ZSXI, LPC1754 and MCP1824-1802E/OT appear in the most repositories here.
Which microcontrollers do boards using the XC3S400-PQ208 use?
Most are built on FPGA (5).
How big is a typical board using the XC3S400-PQ208?
The median is 101.5 × 83 mm.
What is the most popular open source board using the XC3S400-PQ208?
By GitHub stars, Sd2snes by mrehkopf, with 717 stars.
Can I simulate one of these boards using the XC3S400-PQ208 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.