5 open source boards using the MIC23250-S4YMT

Real designs built with the MIC23250-S4YMT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the MIC23250-S4YMT

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MIC23250-S4YMT connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 has a decoupling capacitor on 5 of 5 designs, most often 4.7 µF.
  • Pin 1 has a inductor on 5 of 5 designs, most often 1 µH.
  • Pin 2 has a decoupling capacitor on 5 of 5 designs, most often 4.7 µF.
  • Pin 4 has a inductor on 5 of 5 designs, most often 1 µH.
Pin 1Connected to: 1.2V 100%
  • Decoupling capacitor on 100% · 4.7 µF (5)
  • Inductor on 100% · 1 µH (5)
Pin 2Connected to: 5V 100%
  • Decoupling capacitor on 100% · 4.7 µF (5)
Pin 3Connected to: GND 100%
Pin 4Connected to: Signal 100%
  • Inductor on 100% · 1 µH (5)
Pin 5Connected to: GND 100%
Pin 6Connected to: 5V 100%
  • Decoupling capacitor on 100% · 4.7 µF (5)
Pin 7Connected to: Signal 100%
  • Inductor on 100% · 1 µH (5)
Pin 8Connected to: 5V 100%
  • Decoupling capacitor on 100% · 4.7 µF (5)
Pin 9Connected to: 5V 100%
  • Decoupling capacitor on 100% · 4.7 µF (5)
Pin 10Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 4.7 µF (5)
  • Inductor on 100% · 1 µH (5)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sd2snes by mrehkopf, Sd2snes by magnotrans, Sd2snes by dfederspiel and Sd2snes xenocrisis by sttng.

The MIC23250-S4YMT in open source designs

The gallery holds 5 open source boards using the MIC23250-S4YMT from 5 GitHub repositories; a typical one measures about 101.5 × 83 mm and carries around 147 components.

100% carry an open source license.

The most starred is Sd2snes by mrehkopf.

Microcontrollers on boards using the MIC23250-S4YMT

What boards using the MIC23250-S4YMT are built for

MIC23250-S4YMT: common questions

Where can I find a MIC23250-S4YMT reference design?

Each of the 5 boards on this page is a real design using the MIC23250-S4YMT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the MIC23250-S4YMT pin 1?

Pin 1 has a decoupling capacitor on 5 of 5 designs, most often 4.7 µF. Counted from the KiCad layouts of 5 open source designs using the MIC23250-S4YMT.

What decoupling capacitors do designs use on the MIC23250-S4YMT pin 2?

Pin 2 has a decoupling capacitor on 5 of 5 designs, most often 4.7 µF. Counted from the KiCad layouts of 5 open source designs using the MIC23250-S4YMT.

How is the MIC23250-S4YMT pin 4 connected?

Pin 4 has a inductor on 5 of 5 designs, most often 1 µH. Counted from the KiCad layouts of 5 open source designs using the MIC23250-S4YMT.

What parts are used alongside the MIC23250-S4YMT?

The 74ALVC164245DGG, CS4344, CY62148EV30-ZSXI, LPC1754 and MCP1824-1802E/OT appear in the most repositories here.

Which microcontrollers do boards using the MIC23250-S4YMT use?

Most are built on FPGA (5).

How big is a typical board using the MIC23250-S4YMT?

The median is 101.5 × 83 mm.

What is the most popular open source board using the MIC23250-S4YMT?

By GitHub stars, Sd2snes by mrehkopf, with 717 stars.

Can I simulate one of these boards using the MIC23250-S4YMT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part