5 open source boards using the PIC12F629-I/P
Real designs built with the PIC12F629-I/P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Sd2snes
mrehkopf
101.5 × 83 mm147 partsGPL-2.0717FPGA
Sd2snes
magnotrans
101.5 × 83 mm147 partsGPL-2.04FPGA
Sd2snes
dfederspiel
101.5 × 83 mm147 partsGPL-2.02FPGA
Sd2snes xenocrisis
sttng
101.5 × 83 mm147 partsGPL-2.01FPGA
Sd2snes-1
emtee40
101.5 × 83 mm147 partsGPL-2.00
How designs wire the PIC12F629-I/P
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the PIC12F629-I/P connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
- Pin 2 has a series resistor on 5 of 5 designs, most often 680 Ω.
- Pin 6 has a series resistor on 5 of 5 designs, most often 680 Ω.
- Pin 6 has a capacitor to GND on 5 of 5 designs, most often 100 pF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: 5V 100% |
|
| Pin 2 | Connected to: Signal 100% |
|
| Pin 6 | Connected to: The microcontroller 100% |
|
| Pin 7 | Connected to: The microcontroller 100% |
|
| Pin 8 | Connected to: GND 100% | — |
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sd2snes by mrehkopf, Sd2snes by magnotrans, Sd2snes by dfederspiel and Sd2snes xenocrisis by sttng.
The PIC12F629-I/P in open source designs
The gallery holds 5 open source boards using the PIC12F629-I/P from 5 GitHub repositories; a typical one measures about 101.5 × 83 mm and carries around 147 components.
100% carry an open source license.
The most starred is Sd2snes by mrehkopf.
Parts used alongside the PIC12F629-I/P
Microcontrollers on boards using the PIC12F629-I/P
What boards using the PIC12F629-I/P are built for
PIC12F629-I/P: common questions
Where can I find a PIC12F629-I/P reference design?
Each of the 5 boards on this page is a real design using the PIC12F629-I/P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the PIC12F629-I/P pin 1?
Pin 1 has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the PIC12F629-I/P.
What resistor goes on the PIC12F629-I/P pin 2?
Pin 2 has a series resistor on 5 of 5 designs, most often 680 Ω. Counted from the KiCad layouts of 5 open source designs using the PIC12F629-I/P.
What resistor goes on the PIC12F629-I/P pin 6?
Pin 6 has a series resistor on 5 of 5 designs, most often 680 Ω. Counted from the KiCad layouts of 5 open source designs using the PIC12F629-I/P.
What parts are used alongside the PIC12F629-I/P?
The 74ALVC164245DGG, CS4344, CY62148EV30-ZSXI, LPC1754 and MCP1824-1802E/OT appear in the most repositories here.
Which microcontrollers do boards using the PIC12F629-I/P use?
Most are built on FPGA (5).
How big is a typical board using the PIC12F629-I/P?
The median is 101.5 × 83 mm.
What is the most popular open source board using the PIC12F629-I/P?
By GitHub stars, Sd2snes by mrehkopf, with 717 stars.
Can I simulate one of these boards using the PIC12F629-I/P before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.