5 open source boards using the MCP1824-1802E/OT
Real designs built with the MCP1824-1802E/OT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Sd2snes
mrehkopf
101.5 × 83 mm147 partsGPL-2.0717FPGA
Sd2snes
magnotrans
101.5 × 83 mm147 partsGPL-2.04FPGA
Sd2snes
dfederspiel
101.5 × 83 mm147 partsGPL-2.02FPGA
Sd2snes xenocrisis
sttng
101.5 × 83 mm147 partsGPL-2.01FPGA
Sd2snes-1
emtee40
101.5 × 83 mm147 partsGPL-2.00
How designs wire the MCP1824-1802E/OT
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MCP1824-1802E/OT connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a decoupling capacitor on 5 of 5 designs, most often 4.7 µF.
- Pin 3 has a decoupling capacitor on 5 of 5 designs, most often 4.7 µF.
- Pin 5 has a decoupling capacitor on 5 of 5 designs, most often 4.7 µF.
- Pin 1 is tied to 3.3V on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: 3.3V 100% |
|
| Pin 2 | Connected to: GND 100% | — |
| Pin 3 | Connected to: 3.3V 100% |
|
| Pin 4 | Connected to: Not connected 100% | — |
| Pin 5 | Connected to: 1.8V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sd2snes by mrehkopf, Sd2snes by magnotrans, Sd2snes by dfederspiel and Sd2snes xenocrisis by sttng.
The MCP1824-1802E/OT in open source designs
The gallery holds 5 open source boards using the MCP1824-1802E/OT from 5 GitHub repositories; a typical one measures about 101.5 × 83 mm and carries around 147 components.
100% carry an open source license.
The most starred is Sd2snes by mrehkopf.
Parts used alongside the MCP1824-1802E/OT
Microcontrollers on boards using the MCP1824-1802E/OT
What boards using the MCP1824-1802E/OT are built for
MCP1824-1802E/OT: common questions
Where can I find a MCP1824-1802E/OT reference design?
Each of the 5 boards on this page is a real design using the MCP1824-1802E/OT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP1824-1802E/OT pin 1?
Pin 1 has a decoupling capacitor on 5 of 5 designs, most often 4.7 µF. Counted from the KiCad layouts of 5 open source designs using the MCP1824-1802E/OT.
What decoupling capacitors do designs use on the MCP1824-1802E/OT pin 3?
Pin 3 has a decoupling capacitor on 5 of 5 designs, most often 4.7 µF. Counted from the KiCad layouts of 5 open source designs using the MCP1824-1802E/OT.
What decoupling capacitors do designs use on the MCP1824-1802E/OT pin 5?
Pin 5 has a decoupling capacitor on 5 of 5 designs, most often 4.7 µF. Counted from the KiCad layouts of 5 open source designs using the MCP1824-1802E/OT.
What parts are used alongside the MCP1824-1802E/OT?
The 74ALVC164245DGG, CS4344, CY62148EV30-ZSXI, LPC1754 and MCP1824-2502E/OT appear in the most repositories here.
Which microcontrollers do boards using the MCP1824-1802E/OT use?
Most are built on FPGA (5).
How big is a typical board using the MCP1824-1802E/OT?
The median is 101.5 × 83 mm.
What is the most popular open source board using the MCP1824-1802E/OT?
By GitHub stars, Sd2snes by mrehkopf, with 717 stars.
Can I simulate one of these boards using the MCP1824-1802E/OT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.