9 open source boards using the MCP2562FD
Real designs built with the MCP2562FD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Mes main board
jmh8231-Dev
160 × 145 mm727 parts6LNo license2Stigma mission board hysteresis
tudsat-rocket
60 × 130 mm170 parts4LNo license0Renesas
RL78 F14 48p Rev2
SuzieLinux
100 × 100 mm48 parts2LGPL-3.00STM32
BLDC Driver 4.6
UofSSpaceTeam
75.2 × 49.3 mm112 parts2LNo license5RL78 G24 Rev3
SuzieLinux
100 × 100 mm42 parts2LGPL-3.00Renesas
RL78 F14 32p Rev2
SuzieLinux
100 × 100 mm33 parts2LGPL-3.00PIC
RPi-MCP2517
GBert
65 × 56.5 mm35 parts2LNo license99Renesas
RA2E1-CAN-Rev2
SuzieLinux
92 × 70 mm25 parts2LGPL-3.00PIC
RPi-Rail
GBert
65 × 56.5 mm35 parts2LNo license99
How designs wire the MCP2562FD
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MCP2562FD connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 2.2 µF).
- The CANH pin has a series resistor on 5 of 5 designs, most often 120 Ω.
- The VIO pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF.
- The STBY pin is tied to GND on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSSpin 2 | Connected to: GND 100% | — |
| VDDpin 3 | Connected to: 5V 100% |
|
| VIOpin 5 | Connected to: 3.3V 100% |
|
| CANHpin 7 | Connected to: A connector 100% |
|
| STBYpin 8 | Connected to: GND 80% · a signal 20% | — |
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RPi-MCP2517 by GBert, BLDC Driver 4.6 by UofSSpaceTeam, Mes main board by jmh8231-Dev and RA2E1-CAN-Rev2 by SuzieLinux.
The MCP2562FD in open source designs
The gallery holds 9 open source boards using the MCP2562FD from 5 GitHub repositories; a typical one measures about 92 × 100 mm and carries around 42 components.
78% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is RPi-MCP2517 by GBert.
What boards using the MCP2562FD are built for
MCP2562FD: common questions
Where can I find a MCP2562FD reference design?
Each of the 9 boards on this page is a real design using the MCP2562FD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP2562FD VDD pin?
The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 5 open source designs using the MCP2562FD.
What resistor goes on the MCP2562FD CANH pin?
The CANH pin has a series resistor on 5 of 5 designs, most often 120 Ω. Counted from the KiCad layouts of 5 open source designs using the MCP2562FD.
What decoupling capacitors do designs use on the MCP2562FD VIO pin?
The VIO pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the MCP2562FD.
Which microcontrollers do boards using the MCP2562FD use?
Most are built on Renesas (3), PIC (2) and STM32 (2).
How big is a typical board using the MCP2562FD?
The median is 92 × 100 mm, and 78% are two-layer designs.
What is the most popular open source board using the MCP2562FD?
By GitHub stars, RPi-MCP2517 by GBert, with 99 stars.
Can I simulate one of these boards using the MCP2562FD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.