ESP32-C3-Evaluation Board
syamei0·Y.maku·kicad/ESP32-C3-Evaluation Board/ESP32-C3-Evaluation Board.kicad_pcb
About the ESP32-C3-Evaluation Board
ESP32-C3-Evaluation Board is an open source PCB design by syamei0, published on GitHub. It is a 2-layer board measuring 40 × 64 mm, with 20 components from 10 distinct parts.
By type, the board carries 6 connectors, 5 diodes, 3 capacitors, 2 switches, 2 resistors and 1 IC.
It belongs with the iot & wireless and dev boards & breakouts designs in this gallery.
From the project
左側はおまけのam2837モタドラ ### 仕様 - wifi - Bluetooth - RJ45-CAN - type-c書き込み ### ⚠注意⚠ - RJ45-書き込み非対応
ESP32-C3-Evaluation Board bill of materials (BOM)
20 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | PinSocket_1x04_P2.54mm_Vertical | U4 |
| 3 | CONN_01X03_PIN Conn_01x03_Pin | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4, J5, J7 |
| 1 | CONN_01X05_PIN Conn_01x05_Pin | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J6 |
| 2 | CONN_01X22_PIN Conn_01x22_Pin | PinHeader_1x22_P2.54mm_Vertical | J10, J11 |
| 1 | R_Potentiometer_US | PinHeader_1x03_P2.54mm_Vertical | RV1 |
| 2 | SW_Push | SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | SW4, SW5 |
| 2 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D10, D11 |
| 3 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D12, D13, D14 |
| 3 | 0.1U 0.1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6, C7 |
| 2 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R7 |
ESP32-C3-Evaluation Board design files
The KiCad project lives in the syamei0/Y.maku repository on GitHub; these links point at the commit this page was built from.
ESP32-C3-Evaluation Board: common questions
How big is the ESP32-C3-Evaluation Board?
The ESP32-C3-Evaluation Board measures 40 × 64 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32-C3-Evaluation Board?
20 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32-C3-Evaluation Board design files?
From the syamei0/Y.maku repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32-C3-Evaluation Board design in my own project?
The repository has no license, so all rights stay with syamei0. Use it as a reference, and ask the author before reusing the design.
More boards in Y.maku
ESP32
ESP32-S3
syamei0
95 × 72 mm142 parts2LNo license0ESP32
Syamei0 MD
syamei0
3.2 × 3.2 mm132 parts2LNo license0ESP32
ESP32 SMD
syamei0
95 × 72 mm113 parts2LNo license0RP2040/RP2350
RP2040 Minimal Design Example
syamei0
72 × 95 mm68 parts2LNo license0ESP32
ESP32C3-miniMAS
syamei0
97 × 72 mm57 parts2LNo license0ESP32
STM32
syamei0
100 × 100 mm33 parts2LNo license0Power supply
syamei0
95 × 72 mm31 parts2LNo license0ESP32
ESP32
syamei0
100 × 100 mm23 parts2LNo license0ESP32-S3-Evaluation Board
syamei0
40 × 64 mm20 parts2LNo license0ESP32
ESP32-C3-pre
syamei0
72 × 95 mm9 parts2LNo license0
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k