RP2040 Minimal Design Example

syamei0·Y.maku·kicad/RP2040/RP2040_minimal_r2.kicad_pcb

RP2040 Minimal Design Example PCB layout, top view — open source RP2040/RP2350 board by syamei0

About the RP2040 Minimal Design Example PCB

RP2040 Minimal Design Example is an open source RP2040/RP2350 PCB design by syamei0, published on GitHub. It is a 2-layer board measuring 72 × 95 mm, with 68 components from 31 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP25625-X-SS, W25Q16JVUXIQ and NJM12877F33. By type, the board carries 23 capacitors, 20 connectors, 11 resistors, 4 ICs, 3 diodes and 2 switches.

It belongs with the iot & wireless designs in this gallery.

From the project

左側はおまけのam2837モタドラ ### 仕様 - wifi - Bluetooth - RJ45-CAN - type-c書き込み ### ⚠注意⚠ - RJ45-書き込み非対応

RP2040 Minimal Design Example, from the project README
From the project README

Main components on the RP2040 Minimal Design Example

RP2040 Minimal Design Example bill of materials (BOM)

68 components, 31 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MCP25625-X-SS
MCP25625-x-SS
U1
1
W25Q16JVUXIQ
U2
1
RP2040
U3
1
NJM12877F33
U4
6
CONN_01X04_PIN
Conn_01x04_Pin
J1, J6, J7, J8, J9, J10
1
CONN_01X04_PIN
Conn_01x04_Pin
J2
3
CONN_01X05_PIN
Conn_01x05_Pin
J3, J4, J13
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J5
1
CONN_01X06_PIN
Conn_01x06_Pin
J11
2
CONN_01X03_PIN
Conn_01x03_Pin
J14, J16
2
CONN_01X17_SOCKET
Conn_01x17_Socket
J15, J21
1
CONN_01X02_PIN
Conn_01x02_Pin
J17
2
RJ45_SHIELDED
RJ45_Shielded
J18, J19
1
CONN_01X02_PIN
Conn_01x02_Pin
J20
1
R
10k1
4
MountingHole
H1, H2, H3, H4
2
SW_Push
SW1, SW2
3
LED
D1, D2, D3
5
0.1U
0.1u
C1, C2, C3, C18, C20
2
15P
15p
C4, C21
Show 11 more
QtyPartRefs
10
100N
100n
C5, C6, C7, C9, C11, C12, C13, C14 +2
2
1u
C8, C10
1
10U
10u
C17
1
0.01U
0.01u
C19
2
22P
22p
C22, C23
2
1k
R1, R5
1
1M
R2
2
27
R3, R4
2
5.1K
5.1k
R6, R7
1
120
R8
3
10K
10k
R9, R10, R11

RP2040 Minimal Design Example design files

The KiCad project lives in the syamei0/Y.maku repository on GitHub; these links point at the commit this page was built from.

RP2040 Minimal Design Example: common questions

What microcontroller does the RP2040 Minimal Design Example use?

The RP2040 Minimal Design Example is built around the RP2040, from the RP2040/RP2350 family.

How big is the RP2040 Minimal Design Example PCB?

The RP2040 Minimal Design Example measures 72 × 95 mm, has 2 copper layers and is 1 mm thick.

How many components are on the RP2040 Minimal Design Example?

68 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the RP2040 Minimal Design Example design files?

From the syamei0/Y.maku repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the RP2040 Minimal Design Example design in my own project?

The repository has no license, so all rights stay with syamei0. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RP2040 Minimal Design Example without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Y.maku

Similar boards