ESP32C3-miniMAS

syamei0·Y.maku·kicad/ESP32C3-miniMAS/ESP32C3-miniMAS.kicad_pcb

ESP32C3-miniMAS PCB layout, top view — open source ESP32 board by syamei0

About the ESP32C3-miniMAS PCB

ESP32C3-miniMAS is an open source ESP32 PCB design by syamei0, published on GitHub. It is a 2-layer board measuring 97 × 72 mm, with 57 components from 21 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the LM1117GS-3.3. By type, the board carries 27 connectors, 19 capacitors, 5 resistors, 2 ICs, 2 switches and 1 diode.

It belongs with the iot & wireless designs in this gallery.

From the project

左側はおまけのam2837モタドラ ### 仕様 - wifi - Bluetooth - RJ45-CAN - type-c書き込み ### ⚠注意⚠ - RJ45-書き込み非対応

ESP32C3-miniMAS, from the project README
From the project README

Main components on the ESP32C3-miniMAS

ESP32C3-miniMAS bill of materials (BOM)

57 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C3-WROOM-02
U1
1
LM1117GS-3.3
U2
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
2
CONN_01X10_SOCKET
Conn_01x10_Socket
J2, J3
1
BAT_XH
J4
1
RJ45_SHIELDED
RJ45_Shielded
J5
1
CONN_01X03_PIN
Conn_01x03_Pin
J6
7
CONN_01X03_PIN
Conn_01x03_Pin
J7, J8, J9, J10, J15, J16, J17
7
CONN_01X04_PIN
Conn_01x04_Pin
J11, J14, J18, J20, J23, J26, J27
2
Jumper_pin
J12, J13
5
CONN_01X02_PIN
Conn_01x02_Pin
J19, J21, J22, J24, J25
1
~
ATA6561
2
SW_Push
SW1, SW3
1
LED
D1
2
10U
10u
C1, C2
13
0.1μF
C3, C4, C5, C6, C7, C8, C9, C10 +5
4
220UF
220uF
C11, C13, C14, C17
2
5.1K
5.1k
R1, R2
1
10K
10k
R3
1
120Ω
R4
Show 1 more
QtyPartRefs
1
10kΩ
R5

ESP32C3-miniMAS design files

The KiCad project lives in the syamei0/Y.maku repository on GitHub; these links point at the commit this page was built from.

ESP32C3-miniMAS: common questions

What microcontroller does the ESP32C3-miniMAS use?

The ESP32C3-miniMAS is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How big is the ESP32C3-miniMAS PCB?

The ESP32C3-miniMAS measures 97 × 72 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32C3-miniMAS?

57 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP32C3-miniMAS design files?

From the syamei0/Y.maku repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ESP32C3-miniMAS design in my own project?

The repository has no license, so all rights stay with syamei0. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ESP32C3-miniMAS without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Y.maku

Similar boards