Syamei0 MD

syamei0·Y.maku·kicad/syamei0_MD/syamei0_MD/syamei0_MD.kicad_pcb

Syamei0 MD PCB layout, top view — open source ESP32 board by syamei0

About the Syamei0 MD PCB

Syamei0 MD is an open source ESP32 PCB design by syamei0, published on GitHub. It is a 2-layer board measuring 3.2 × 3.2 mm, with 132 components from 24 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the LM1117DT-3.3, CH217K, IR2302 and ESP32-C3-WROOM-02. By type, the board carries 42 capacitors, 40 resistors, 19 ICs, 16 transistors, 8 diodes and 6 connectors.

It belongs with the iot & wireless designs in this gallery.

From the project

左側はおまけのam2837モタドラ ### 仕様 - wifi - Bluetooth - RJ45-CAN - type-c書き込み ### ⚠注意⚠ - RJ45-書き込み非対応

Syamei0 MD, from the project README
From the project README

Main components on the Syamei0 MD

Syamei0 MD bill of materials (BOM)

132 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1
~
U1
1
LM1117DT-3.3
~
U2
1
CH217K
IR2302
U3
7
IR2302
U4, U7, U8, U11, U12, U15, U16
6
~
U5, U6, U9, U10, U13, U14
1
ESP32-C3-WROOM-02
U17
1
~
U18
1
LM1117DT-3.3
U20
16
TK7R4A10PL_TabUp
Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +8
1
USB_C_RECEPTACLE_USB2.0_16P
RJ45_Shielded
J1
3
CONN_01X03_SOCKET
XT60_Female_Horizontal
J4, J9, J14
1
CONN_01X05_SOCKET
XT60_Female_Horizontal
J19
1
XT60_Male_Horizontal
J21
1
NJM7805
LDO1
8
1N4148
D1, D2, D3, D4, D5, D6, D7, D8
2
0.47uF
C1, C12
20
0.1uF
C2, C3, C4, C5, C6, C13, C14, C15 +12
1
220UF
10uF
C7
7
10uF
C8, C18, C19, C29, C30, C40, C41
8
220uF
C9, C11, C20, C22, C31, C33, C42, C44
Show 4 more
QtyPartRefs
4
470uF
C10, C21, C32, C43
8
910
R1, R2, R11, R12, R21, R22, R31, R32
16
4.7
R3, R4, R9, R10, R13, R14, R19, R20 +8
16
R47k
R5, R6, R7, R8, R15, R16, R17, R18 +8

Syamei0 MD design files

The KiCad project lives in the syamei0/Y.maku repository on GitHub; these links point at the commit this page was built from.

Syamei0 MD: common questions

What microcontroller does the Syamei0 MD use?

The Syamei0 MD is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Syamei0 MD PCB?

The Syamei0 MD measures 3.2 × 3.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Syamei0 MD?

132 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Syamei0 MD design files?

From the syamei0/Y.maku repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Syamei0 MD design in my own project?

The repository has no license, so all rights stay with syamei0. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Syamei0 MD without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Y.maku

Similar boards