ESP32
syamei0·Y.maku·kicad/ESP32/ESP32/ESP32.kicad_pcb
About the ESP32 PCB
ESP32 is an open source ESP32 PCB design by syamei0, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 23 components from 12 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. By type, the board carries 21 connectors, 1 IC and 1 switch.
It belongs with the iot & wireless designs in this gallery.
From the project
左側はおまけのam2837モタドラ ### 仕様 - wifi - Bluetooth - RJ45-CAN - type-c書き込み ### ⚠注意⚠ - RJ45-書き込み非対応
Main components on the ESP32
ESP32 bill of materials (BOM)
23 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 ESP32-DEVKITC-32E | MODULE_ESP32-DEVKITC-32E | U1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P Conn_01x02_Socket | JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J1 |
| 6 | CONN_01X03_SOCKET Conn_01x02_Socket | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J2, J3, J4, J9, J10, J11 |
| 1 | CONN_01X03_SOCKET is2 | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | CONN_01X04_SOCKET Conn_01x02_Socket | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | CONN_01X02_SOCKET Conn_01x02_Socket | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | RJ45_SHIELDED Conn_01x02_Socket | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J8 |
| 2 | Conn_01x03_Socket | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J12, J13 |
| 3 | CONN_01X03_SOCKET Conn_01x01_Socket | JST_XH_B1B-XH-AM_1x01_P2.50mm_Vertical | J14, J15, J17 |
| 3 | Conn_01x01_Socket | JST_XH_B1B-XH-AM_1x01_P2.50mm_Vertical | J16, J20, J21 |
| 2 | CONN_01X05_SOCKET Conn_01x01_Socket | JST_XH_B1B-XH-AM_1x01_P2.50mm_Vertical | J18, J19 |
| 1 | SW_Nidec_CAS-120A1 | TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | SW1 |
ESP32 design files
The KiCad project lives in the syamei0/Y.maku repository on GitHub; these links point at the commit this page was built from.
ESP32: common questions
What microcontroller does the ESP32 use?
The ESP32 is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the ESP32 PCB?
The ESP32 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32?
23 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32 design files?
From the syamei0/Y.maku repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32 design in my own project?
The repository has no license, so all rights stay with syamei0. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Y.maku
ESP32
ESP32-S3
syamei0
95 × 72 mm142 parts2LNo license0ESP32
Syamei0 MD
syamei0
3.2 × 3.2 mm132 parts2LNo license0ESP32
ESP32 SMD
syamei0
95 × 72 mm113 parts2LNo license0RP2040/RP2350
RP2040 Minimal Design Example
syamei0
72 × 95 mm68 parts2LNo license0ESP32
ESP32C3-miniMAS
syamei0
97 × 72 mm57 parts2LNo license0ESP32
STM32
syamei0
100 × 100 mm33 parts2LNo license0Power supply
syamei0
95 × 72 mm31 parts2LNo license0ESP32-S3-Evaluation Board
syamei0
40 × 64 mm20 parts2LNo license0ESP32-C3-Evaluation Board
syamei0
40 × 64 mm20 parts2LNo license0ESP32
ESP32-C3-pre
syamei0
72 × 95 mm9 parts2LNo license0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k