Power supply
syamei0·Y.maku·kicad/power_supply/power_supply.kicad_pcb
About the Power supply PCB
Power supply is an open source PCB design by syamei0, published on GitHub. It is a 2-layer board measuring 95 × 72 mm, with 31 components from 14 distinct parts.
Other key parts include the BP5293-50. By type, the board carries 16 connectors, 4 diodes, 4 resistors, 3 capacitors, 1 IC and 1 transistor.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
左側はおまけのam2837モタドラ ### 仕様 - wifi - Bluetooth - RJ45-CAN - type-c書き込み ### ⚠注意⚠ - RJ45-書き込み非対応
Main components on the Power supply
Power supply bill of materials (BOM)
31 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BP5293-50 | SIP3_11.6x8.5mm | U2 |
| 1 | IRLB8721PBF | TO-220-3_Vertical | Q1 |
| 1 | XT60_12V_IN | AMASS_XT60-M_1x02_P7.20mm_Vertical | J1 |
| 2 | E_SW | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2, J17 |
| 5 | XT60_OUT | AMASS_XT60-F_1x02_P7.20mm_Vertical | J3, J4, J5, J6, J7 |
| 8 | XH_OUT | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J9, J10, J11, J12, J13, J14, J15, J16 |
| 1 | Fuse | 3557-15_KEY | F1 |
| 1 | GRFE-S-112DMP | RELAY-TH_GRFE-S-112DMP | K1 |
| 2 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D4 |
| 2 | D | Nexperia_CFP3_SOD-123W | D10, D11 |
| 3 | C_Polarized | CP_Radial_D10.0mm_P5.00mm | C1, C2, C3 |
| 1 | 220K 220k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 2 | R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 1 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
Power supply design files
The KiCad project lives in the syamei0/Y.maku repository on GitHub; these links point at the commit this page was built from.
Power supply: common questions
How big is the Power supply PCB?
The Power supply measures 95 × 72 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power supply?
31 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Power supply design files?
From the syamei0/Y.maku repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Power supply design in my own project?
The repository has no license, so all rights stay with syamei0. Use it as a reference, and ask the author before reusing the design.
More boards in Y.maku
ESP32
ESP32-S3
syamei0
95 × 72 mm142 parts2LNo license0ESP32
Syamei0 MD
syamei0
3.2 × 3.2 mm132 parts2LNo license0ESP32
ESP32 SMD
syamei0
95 × 72 mm113 parts2LNo license0RP2040/RP2350
RP2040 Minimal Design Example
syamei0
72 × 95 mm68 parts2LNo license0ESP32
ESP32C3-miniMAS
syamei0
97 × 72 mm57 parts2LNo license0ESP32
STM32
syamei0
100 × 100 mm33 parts2LNo license0ESP32
ESP32
syamei0
100 × 100 mm23 parts2LNo license0ESP32-C3-Evaluation Board
syamei0
40 × 64 mm20 parts2LNo license0ESP32-S3-Evaluation Board
syamei0
40 × 64 mm20 parts2LNo license0ESP32
ESP32-C3-pre
syamei0
72 × 95 mm9 parts2LNo license0
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k